Journals →  Chernye Metally →  2021 →  #10

Chernye Metally



The October (2021) issue of the "Chernye Metally" journal is mainly dedicated to the 65th anniversary of the Lipetsk State Technical University.

 

The issue is headed with articles in which the issues of modernization of existing and construction of new mills for production of sheet metal are highlighted, proposals are formulated to improve the criteria for optimizing hot rolling technology according to the characteristics of the transverse profile, ensuring metal savings and increasing the productivity of broadband mills, and also ways of regulating rolling modes and their influence on the process of metal displacement from the edges to the longitudinal axis of the roll are considered and a mathematical model to correct the strip cooling modes has been developed.

 

The "Steel Production" section presents an article devoted to modernization of the device for movement of trolleys with ladles in the smelting shop of the Aktobe Ferroalloy Plant in order to reduce the cost of the resulting product and increase the profit from its sale.

 

In the "Pipe production" section articles are published, which show the results of modeling the process of screw piercing of hollow billets, computer modeling by the finite element method of rolling pipes in a reduction mill in the QForm 3D software package and mechanical ring stresses in a pipe to determine the degree of danger of such defects.

 

The "Ecology and recycling" section is devoted to the effect of the cross-border carbon tax on the ferrous metallurgy of Russia (continuation of the publication from the August issue of the " Chernye Metally " journal), as well as projects of young specialists devoted to the climate warming challenge.

 

The "Machine-building technologies" section describes typical operations of preliminary shaping of an open box-shaped workpiece obtained from medium-alloy steel 30KhGSA with increased strength,

 

The journal publishes an interview with D.V. Nefedov, General Director, dedicated to the 15th anniversary of the Ural Metalworking Company.


Please find more details below, or order your printed or electronic version of the Journal.


65th anniversary of Lipetsk State Technical University
ArticleName Sheet metal technology and production – a look at ambitions and trends
ArticleAuthors I. P. Mazur, E. B. Bobkov, V. N. Soloviev
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru
E. B. Bobkov, Cand. Eng., Associate Prof., Metal Forming Dept., e-mail: bobkov0011@yandex.ru
V. N. Soloviev, Cand. Eng., Associate Prof., Metal Forming Dept.

ArticleName Development of mathematical models for formation of the cross profile of strips during hot rolling, taking into account the wear of rolls
ArticleAuthors V. A. Pimenov, D. A. Kovalev, M. A. Dagman, I. P. Mazur.
ArticleAuthorsData

Novolipetsk Metallurgical Plant (Lipetsk, Russia):

V. A. Pimenov, Cand. Eng., Senior Researcher, Chief Specialist, e-mail: pimenov_va@nlmk.com
D. A. Kovalev, Cand. Eng., Acting Director of Directorate for Development of NewTechnologies, e-mail: kovalev_da@nlmk.com
M. A. Dagman, Specialist, Rolling Production Directorate

 

Lipetsk State Technical University (Lipetsk, Russia)
I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru

ArticleName Influence of technological parameters of rolling in universal stands on the process of displacement of metal from edges to the longitudinal axis of the roll. Message 3. Adjustments of rolling modes
ArticleAuthors A. V. Polyakov, R. Shatshu Netshutzim, I. P. Mazur
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

A. V. Polyakov, Post-Graduate Student, Metal Forming Dept., e-mail: Pool_Akov@mail.ru
R. Shatshu Netshutzim, Post-Graduate Student, Metal Forming Dept.
I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru

ArticleName Development of mathematical models of strip heat transfer in the inter-stand spacings of the finishing group during wide-strip hot rolling
ArticleAuthors V. A. Pimenov, A. K. Pogodaev, D. A. Kovalev
ArticleAuthorsData

Novolipetsk Metallurgical Plant (Lipetsk, Russia):

V. A. Pimenov, Cand. Eng., Senior Researcher, Chief Specialist, e-mail: pimenov_va@nlmk.com
D. A. Kovalev, Cand. Eng., Acting Director of Directorate for Development of NewTechnologies, e-mail: kovalev_da@nlmk.com


Lipetsk State Technical University (Lipetsk, Russia):

A. K. Pogodaev, Dr. Eng., Prof., First Vice-Rector

ArticleName Influence of the speed asymmetry coefficient on the power parameters and bending of a strip
ArticleAuthors A. A. Kawalek, H. I. Dyia, K. V. Bakhaev, K. S. Gorbunov
ArticleAuthorsData

Czestochowa University of Technology (Czestochowa, Poland):

A. A. Kawalek, Dr. Eng., Prof., Faculty of Production Technology and Materials Science
H. I. Dyia, Dr. Eng., Prof., Faculty of Production Technology and Materials Science

 

Lipetsk State Technical University (Lipetsk, Russia):
K. V. Bakhaev, Cand. Eng., Associate Prof., Metal Forming Dept.
K. S. Gorbunov, Post-graduate Student, Metal Forming Dept., e-mail: beluivolk96@mail.ru

ArticleName Influence of strip non-flatness on the coil stress-strain state
ArticleAuthors S. M. Belsky, I. I. Shopin
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

S. M. Belsky, Dr. Eng., Prof., Metal Forming Dept., e-mail: Belsky-55@yandex.ru
I. I. Shopin, Cand. Eng., Associate Prof., Metal Forming Dept.

Steelmaking
ArticleName Reengineering of a device for moving trolleys with ladles in the smelting shop of the Aktobe Ferroalloy Plant
ArticleAuthors A. M. Baktiyarov, A. V. Nefedov, N. A. Chichenev
ArticleAuthorsData

Novotroitsk branch of NUST MISIS, Novotroitsk, Russia

A. M. Baktiyarov, Student, e-mail: nfmisis@yandex.ru
A. V. Nefedov, Cand. Ped., Associate Prof., Deputy Director, e-mail: cosnovotr@rambler.ru

 

National University of Science and Technology “MISiS” (Moscow, Russia)
N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru

Tubemaking
ArticleName Features of the stress state of screw piercing of especially thick-walled hollow billets for mechanical engineering
ArticleAuthors N. M. Vavilkin, S. M. Kriskovich
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

N. M. Vavilkin, Dr. Eng., Prof., Metal Forming Dept.
S. M. Kriskovich, Senior Lecturer, Metal Forming Dept., e-mail: moose2@yandex.ru

ArticleName Analysis of manufacturing internal pressure induced defects of the pipe wall with modeling of stresses
ArticleAuthors D. V. Zhukov, A. A. Melnikov, S. V. Konovalov, A. V. Afanasyev
ArticleAuthorsData

Gazprom Transgaz Samara Ltd. (Samara, Russia)1 ; Samara National Research University named after Academician S. P. Korolev (Samara, Russia)2:

D. V. Zhukov, Head of the Database Support Group1, Post-Graduate Student, Dept. of Metal Technology and Aviation Materials Science2

 

Samara National Research University named after Academician S. P. Korolev (Samara, Russia):
A. A. Melnikov, Cand. Eng., Associate Prof., Dept. Materials Science
S. V. Konovalov, Dr. Eng. Prof., Head of the Dept. of Metal Technology and Aviation Materials Science, e-mail: ksv@ssau.ru
A. V. Afanasyev, Cand. Eng., Junior Researcher, Dept. Aviation Materials Science

ArticleName Simulation mathematical model of the pipe reduction process
ArticleAuthors A. V. Vydrin, D. A. Akhmerov, E. V. Khramkov
ArticleAuthorsData

RusNITI JSC (Chelyabinsk, Russia):

A. V. Vydrin, Dr. Eng., Prof., Deputy General Director for Research, e-mail: VydrinAV@rosniti.ru

 

South Ural State University (Chelyabinsk, Russia):
D. A. Akhmerov, Postgraduate Student, Dept. of Processes and Machines for Metal Forming, Junior Researcher, Laboratory for Modeling Technological Processes, e-mail: AhmerovDA@rosniti.ru

 

Scientific and Technical center TMK Ltd. (TMK NTTs) (Moscow, Russia):
E. V. Khramkov, Deputy Head of the Laboratory for Digitalization of Technologies

Ecology and Recycling
ArticleName EU cross-border carbon tax: hedging risks
ArticleAuthor S. A. Roginko
ArticleAuthorData

Financial University under the Government of the Russian Federation (Moscow, Russia):

S. A. Roginko, Prof., Head of the Center for Ecology and Development of the RAS Institute of Europe, e-mail: roginko@bk.ru

Machine-building technologies
ArticleName Elastic-hereditary errors of fixation of non-rigid box blanks
ArticleAuthors A. S. Yamnikov, E. A. Danilenko, O. A. Kornev, A. A. Malikov
ArticleAuthorsData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Dept. of Machine-building Technology, e-mail: yamnikovas@mail.ru
E. A. Danilenko, Post-graduate Student, Dept. of Machine-building Technology, e-mail: danilenkoevg@rambler.ru
O. A. Kornev, Cand. Eng., Associate Prof., Dept. of Missile Weapons, e-mail: kornevolegtula@yandex.ru
A. A. Malikov, Dr. Eng., Prof., Head of the Dept. of Machine-building Technology, e-mail: finance@tsu.tula.ru

Journals →  Chernye Metally →  2021 →  #10