Название |
Reengineering of a device for moving trolleys with ladles in the smelting shop of the Aktobe Ferroalloy Plant |
Информация об авторе |
Novotroitsk branch of NUST MISIS, Novotroitsk, Russia
A. M. Baktiyarov, Student, e-mail: nfmisis@yandex.ru A. V. Nefedov, Cand. Ped., Associate Prof., Deputy Director, e-mail: cosnovotr@rambler.ru
National University of Science and Technology “MISiS” (Moscow, Russia) N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru |
Реферат |
In connection with the increase in productivity of the Aktobe Ferroalloy Plant, which is part of TNK Kazchrome JSC, it became necessary to increase the number of trucks with ladles, which are simultaneously delivered to the smelting furnaces. As a result of reengineering of the device for the movement of trucks with ladles in the smelting shop No. 2 of the Aktobe Ferroalloy Plant, the possibility of simultaneous rolling and rolling of three trucks was realized, which allows to increase productivity and reduce operating costs. The main elements of the shunting device were selected: a winch, a rope, branch blocks, a swivel roller, etc. Calculations show that as a result of the implementation of the proposed measures, the time for current repairs will decrease by 5 hours, the production cost will decrease by 0.35%, the profit from product sales will increase by 8.5%, the payback period of the proposed investment project is 1.5 years. |
Библиографический список |
1. JSC Transnational company Kazchrome [electronic resource]. Available at: https://www.kazchrome.com/ru/ (accessed: 14.05.2021). 2. Aktobe Ferroalloys Plant [electronic resource]. Available at: https://www.kazchrome.com/ru/business-overview/divisions/aktobe/ (accessed: 14.05.2021). 3. Druinskiy М. I., Zhuchkov V. I. Obtaining complex ferroalloys from mineral raw materials of Kazakhstan. Alma-Ata: Nauka, 1988. 208 p. 4. Eronko S. P., Gorbatyuk S. М., Oshovskaya Е. V., Statodubtsev B. I. Development of an automatic system for gas-dynamic cutting-off of the final slag for a converter with a rotating body. Izvestiya vuzov. Chernaya metallurgiya. 2017. No. 11. pp. 863–869. 5. Аrabadzhi Ya. N., Olennikov А. S., Kurchukov А. М., Likhacheva Т. А. Thickening equipment modernization with supaflo process (Outotec) at Talnakh Concentrator. Tsvetnye Metally. 2018. No. 6. pp. 38–43. 6. Zhareken А. Zh., Dzhumaliev А. S. Burning furnace cooling circuit refitting. Gornyi Zhurnal. 2018. No. 5. pp. 34–35. 7. Kalinenko Yu. N., Kamenev А. А., Mitkin А. V., Kireenkov А. N. Reengineering of roasting machines at pelletizing factory. Gornyi Zhurnal. 2017. No. 5. pp. 67–69. 8. Gorbatyuk S. М., Morozova I. G., Naumova М. G. Development of a working model of the process of reindustrialization of the die steels heat treatment production. Izvestiya vuzov. Chernaya metallurgiya. 2017. Vol. 60. No. 5. pp. 410–415. 9. Rumyantsev M. I. Some approaches to improve the resource efficiency of production of flat rolled steel. CIS Iron and Steel Review. 2016. Vol. 12. pp. 32–36. 10. Nefedov А. V., Svichkar V. V., Chicheneva О. N. Reengineering of a skip hoist for loading the furnace of the CJSC RIFAR foundry department. Stal. 2020. No. 7. pp. 50–53. 11. Gorbatyuk S. М., Morozova I. G., Naumova М. G. Development of a working model of the process of reindustrialization of the die steels heat treatment production. Izvestiya vuzov. Chernaya metallurgiya. 2017. Vol. 60. No. 5. pp. 410–415. 12. Chichenev N. A. Reengineering of the slab-centering unit of a roughing mill stand. Metallurgist. 2018. Vol. 62. No. 7–8. pp. 701–706. 13. Mayrhofer А., Hartl F., Rohrhofer А., Stohl R. Control of steelmaking parameteres. Chernye Metally. 2018. No. 9. pp. 28–33. 14. Bardovskiy A. D., Gorbatyuk S. M., Keropyan A. M., Bibikov P. Y. Assessing parameters of the accelerator disk of a centrifugal mill taking into account features of particle motion on the disk surface. Journal of Friction and Wear. 2018. Vol. 39. No. 4. pp. 326–329. 15. Efremov D. B., Stepanov V. М., Chicheneva О. N. Modernization of the mechanism for quick squeezing of rolls of the 2800 mill rolling stand DUO of JSC Ural Steel. Stal. 2020. No. 8. pp. 44–47. 16. Pastukhov I. F., Lukin V. V., Zhukov N. I. Wagons: textbook. Moscow: Transport, 1988. 280 p. 17. GOST 8338–75. Single row radial ball bearings. Main dimensions. Introduced : 01.07.1976. Moscow: Izdatelstvo standartov, 1975. 18. GOST 27365–87. Single row radial ball bearings. Boundary dimensions. Introduced: 01.07.1988. Moscow: Izdatelstvo standartov, 1987. 19. Andrienko L. А., Baykov B. А., Ganulich I. К. et. al. Machine elements: tutorial. Moscow: Izdatelstvo MGTU imeni N. E. Baumana, 2007. 520 p. 20. Dunaev P. F., Lelikov О. P. Design of units and parts of machines: textbook for universities. Moscow: Izdatelskiy tsentr «Акаdemiya», 2008. 496 p. 21. LM-71 Cable hoist [electronic resource]. Available at: http://gordrobmash.ru/produkciya/lebedki/manevrovaya-lebyodka-lm-71/ (accessed: 06.05.2021). 22. GOST 3079-80. Two lay rope type ТЛК-О construction 6×37 (1+6+15+15)+1 о.с. Dimensions. Introduced: 01.01.1982. Moscow: Standartinform, 1980. |