ArticleName |
Experimental testing of radial-shear rolling to obtain a deformed alloy of the Co – Cr – Mo system |
ArticleAuthorData |
National University of Science and Technology MISIS, Moscow, Russia:
S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: glk-omd@yandex.ru Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: y.gamin@mail.ru T. Yu. Kin, Postgraduate Student, Dept. of Metal Forming, e-mail: tatianakin@mail.ru
JSC Plant of High-Quality Alloys, Moscow, Russia:
S. A. Kostin, Development Director, e-mail: kostin@ezks.ru |
References |
1. GOST R ISO 5832-12–2009. Implants for surgery. Metal materials. Part 12: Wrought cobaltchromium-molybdenum alloy. Introduced: 01.09.2010. 2. Eliaz N. Corrosion of metallic biomaterials: A review. Materials. 2019. Vol. 12, Iss. 3. 407. DOI: 10.3390/ma12030407 3. Galkin S. P., Gamin Yu. V., Aleshchenko A. S., Romantsev B. A. Modern development of elements of theory, technology and mini-mills of radial-shear rolling. Chernye Metally. 2021. No. 12. pp. 51–58. 4. Potapov I. N., Polukhin P. I. Technology of screw rolling. Moscow : Metallurgiya, 1990. 344 p. 5. Stefanik A., Szota P., Mróz S., Wachowski M. Changes in the properties in bimodal Mg alloy bars obtained for various deformation patterns in the RSR rolling process. Materials. 2022. Vol. 15, Iss. 3. 954. DOI: 10.3390/ma15030954 6. Galkin S. P., Aleshchenko A. S., Gamin Y. V. Development and experimental testing of the technology for producing deformed bars of alloy D16T from continuously casting billets of small diameter with low elongation ratios. Russ. J. Non-ferrous Metals. 2022. Vol. 63. pp. 328–335. DOI: 10.3103/S1067821222030063 7. Lezhnev S. N., Naizabekov A. B., Panin E. A., Volokitina I. E., Arbuz A. S. Graded microstructure preparation in austenitic stainless steel during radial-shear rolling. Metallurgist. 2021. Vol. 64. pp. 1150–1159. DOI: 10.1007/s11015-021-01100-5 8. Galkin S. P., Aleschenko A. S., Romantsev B. A. et al. Effect of preliminary deformation of continuously cast billets by radial-shear rolling on the structure and properties of hot-rolled chromium-containing steel pipes. Metallurgist. 2021. Vol. 65. pp. 185–195. DOI: 10.1007/s11015-021-01147-4 9. Wolrath K. Production of round products using three-roll mills. Chernye Metally. 2004. No.12. pp. 23, 24. 10. Nussbaum G., Kraemer V., Bittner G., Schnel G. Experience and results of operation of a three-roll reducing and sizing unit. Chernye Metally. 2007. No. 1. pp. 37–43. 11. Radyuchenko Yu. S. Rotary forging. Moscow : GNTI, Mashlit, 1962. 188 p. 12. Andreev V. A., Yusupov V. S., Perkas M. M., Prosvirnin V. V. et al. Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP. Russ. Metall. 2017. Vol. 2017. No. 10. pp. 890–894. DOI: 10.1134/S0036029517100020 13. Kharitonov E. A., Alekseev P. L., Romanenko V. P. Temperature field in blank during radial-shear rolling. Steel in Translation. 2010. No. 40. pp. 12–16. DOI: 10.3103/S0967091210010043 14. Gamin Y. V., Koshmin A. N., Dolbachev A. P. et al. Studying the influence of radial-shear rolling on thermal deformation conditions of A1050 processing. Russ. J. Non-ferrous Metals. 2020. No. 61. pp. 646–657. DOI: 10.3103/S1067821220060085 15. Arbuz A., Kawalek A., Ozhmegov K., Dyja H. et al. Using of radial-shear rolling to improve the structure and radiation resistance of zirconium-based alloys. Materials. 2020. Vol. 13, Iss. 19. 4306. DOI: 10.3390/ma13194306 16. Valeev I. Sh., Valeeva A. Kh. Changes in the microhardness and microstructure of M1 copper during radial-shear rolling. Materials Letters. 2013. Vol. 3. No.1 (9). pp. 38–40. 17. Stefanik A., Szota P., Mróz S. et al. Properties of the AZ31 magnesium alloy round bars obtained in different rolling processes. Arch. Metall. Mater. 2015. Vol. 60, Iss. 4. pp. 3002–3005. DOI: 10.1515/amm-2015-0479 18. Stefanik A., Morel A., Mroz S., Szota P. Theoretical and experimental analysis of aluminum bars rolling process in three-high skew rolling mill. Arch. Metall. Mater. 2015. Vol. 60. Iss. 2. pp. 809–813. 19. Valeev I. S., Valeeva A. K., Fazlyakhmetov R. F. et al. Effect of radial-shear rolling on structure of aluminum alloy D16 (Al-4.4Cu-1.6Mg). Inorg. Mater. Appl. Res. 2015. Vol. 6. pp. 45–48. DOI: 10.1134/S2075113315010153 20. Naydenkin E. V., Ratochka I. V., Mishin I. P., Lykova O. N. Evolution of the structural-phase state of a VT22 titanium alloy during helical rolling and subsequent aging. Russ. Phys. J. 2015. Vol. 58, Iss. 8. pp. 1068–1073. DOI: 10.1007/s11182-015-0613-7 21. Valeeva A. Kh., Valeev I. Sh., Fazlyakhmetov R. F. Microstructure of the β-Phase in the Sn11Sb5.5Cu babbit. Phys. Metals Metallogr. 2017. Vol. 118, Iss. 1. pp. 48–51. DOI: 10.1134/S0031918X17010082 22. Naizabekov A. B., Lezhnev S. N., Dyja H., Bajor T. et al. The effect of cross rolling on the microstructure of ferrous and non-ferrous metals and alloys. Metalurgija. 2017. Vol. 56. Iss. 1–2. pp. 199–202. 23. Karpov B. V., Patrin P. V., Galkin S. P. et al. Radial-shear rolling of titanium alloy VT-8 bars with controlled structure for small diameter ingots (≤200 mm). Metallurgist. 2018. Vol. 61. Iss. 9–10. pp. 884–890. DOI: 10.1007/s11015-018-0581-6 24. Patrin P. V., Karpov B. V., Aleshchenko A. S., Galkin S. P. Evaluation of technological possibilities of radial-shear rolling of long products from KhN73MBTYu heat-resistant alloy. Stal. 2020. No. 1. pp. 18–21. 25. Gamin Yu. V., Kin T. Yu., Tikhomirov E. O. Analysis of the microstructure, phase composition and properties of the Co–29Cr–6Mo alloy in the cast and annealed state. Bernstein Readings on Thermomechanical Processing of Metallic Materials. Collection of abstracts. Scientific and technical workshop. Moscow. 2022. p. 120. 26. Chiba A., Kumagai K., Takeda H., Nomura N. Mechanical properties of forged low Ni and C-containing Co – Cr – Mo biomedical implant alloy. Materials Science Forum. 2005. Vols. 475–479. pp. 2317–2322. DOI: 10.4028/www.scientific.net/msf.475-479.2317 27. Huang P., Lopez H. F. Athermal ε-martensite in a Co – Cr – Mo alloy: grain size effects. Materials Letters. 1999. Vol. 39, Iss. 4. pp. 249–253. DOI: 10.1016/s0167-577x(99)00022-1 |