Journals →  Obogashchenie Rud →  2013 →  #1 →  Back

EQUIPMENT
ArticleName Upon modernization of domestically produced radial thickeners
ArticleAuthor Bauman A. V.
ArticleAuthorData

Gormashexport CJSC (Russia):

Bauman A. V., Deputy General Director on Scientific Work, Ph. D. in Technical Sciences, aleksei_bauman@mail.ru

Abstract

Possibilities of bottlenecks elimination in the operating ore-dressing plants' return water and thickening systems through the existing processes and equipment modernization and optimization in compliance with the current production tasks, are considered. It is shown, that solutions of such problems as increase of clarification rate, solid phase thickening degree, area throughput rate, in two thirds of cases do not require cardinal renewal of equipment stock and is quite possible within available areas, and frequently with release of part of equipment from operation. The existing operation modernization tasks require integrated solutions of both design and technological character on the basis of system approach to production processes. Three main trends in modernization and optimization of radial thickeners operation have been distinguished: 1) design alterations by means of unique feed chutes, slime removal system as well as feed and flocculant supply system installation; 2) thin-layer thickening units application; 3) preliminary separation of part of solid phase from feed slurry by means of screens, deslimers or hydrocyclones. By way of practical examples it is shown how, using the proposed approach to modernization, to achieve a desired result under a specific-facility conditions, with minimal expenses and high efficiency.

keywords Thickening, return water system, slime, radial thickener, high-rate thickener, thin-layer thickening, modernization, flocculant
References

1. Basov A. I., Eltsev F. P. Spravochnik mekhanika zavodov tsvetnoy metallurgii (Reference book of a mechanic of nonferrous metallurgy plants). Moscow, Metallurgiya, 1981, 496 p.
2. Kurenkov V. F. Sorosovskiy Obrazovatelnyy Zhurnal — Soros Educational Journal. 1997, No. 7, pp. 57–63.
3. Richardson P. F., Connelly L. J. Reagents in Mineral Technology, 1988, Vol. 27, pp. 519–558.
4. Karmazin V. I., Sergo Ye. Ye., Zhendrinskiy A. P. et al. Protsessy i mashiny dlya obogashcheniya poleznykh iskopayemykh (Processes and machinery for mineral processing). Moscow, Nedra, 1974, 560 p.
5. Ibragimov A. T., Bauman A. V., Fatyushin M. V. Modernizatsiya sgustiteley glinosyemnogo proizvodstva (Modernization of thickeners of aluminous production). Alyuminiy Sibiri — 2007. Sbornik nauchnykh statey (Aluminum of Siberia — 2007. Collection of scientific articles). Krasnoyarsk, Verso Ltd., 2007, pp. 234–238.
6. Preliminary pat. 19680 Republic of Kazakhstan.
7. Yeremin N. I., Naumchik A. N., Kazakov V. G. Protsessy i apparaty glinozemnogo proizvodstva (Processes and devices of aluminous production). Moscow, Metallurgiya, 1980, 360 p.
8. Bauman A. V. Rekonstruktsiya i modernizatsiya radialnykh sgustiteley (Reconstruction and modernization of radial thickeners). VIII Kongress obogatiteley stran CNG. Sbornik materialov (VIII Congress of dressers of CIS countries. Collection of materials). Vol. 1. Moscow, MISIS, 2011, pp. 35–38.
9. Stepanenko A. I., Bauman A. V. Intensifikatsiya protsessov glinozemnogo proizvodstva (Intensification of processes of aluminous production). Alyuminiy Sibiri — 2008. Sbornik nauchnykh statey (Aluminum of Siberia — 2008. Collection of scientific articles). Krasnoyarsk, Verso Ltd, 2008, pp. 385–388.
10. Ostrovskiy G. M. et al. Novyy spravochnik khimika i tekhnologa. Protsessy i apparaty khimicheskikh tekhnologiy (New reference book of chemist and process engineer. Processes and devices of chemical technologies). Pt. 2; ed. G. M. Ostrovskiy. St. Petersburg, Professional, 2007, 916 p.

Language of full-text russian
Full content Buy
Back