Журналы →  Gornyi Zhurnal →  2011 →  №11 →  Назад

THEORY AND PRACTICE OF PRODUCTION
THE QUESTIONS OF DEVELOPMENT OF MINERAL RESOURCES DEPOSITS BY UNDERGROUND METHOD
Название Taking-down ore mass with using special moving complex in underground mining methods with caving heads and adjacent strata
Автор Valiev N. G., Berkovich V. M., Zagarskikh M. S.
Информация об авторе

Valiev N. G., Prorector for Research, Professor, Doctor of Engineering Sciences, phone: +7 (343) 257-45-25, Berkovich V. M., Associate Professor Department Mining, Candidate of Engineering Science, Zagarskikh M. S., Post-graduate Student Department Mining, Yralskiy State Mining University

Реферат

There is currently a trend towards greater use of underground mining of large ore deposits with a massive collapse of the ore and host rocks, whose effectiveness depends on the costs of training blocks, and the underside of the ore mass release technology, primarily for completeness and purity (quality) its extraction from the subsoil. In the 1980s, the institute "Unipromed" with the participation of the Sverdlovsk Mining Institute was established design of mobile complex, representing an aggregate sites and mechanisms in the overall manufacturing process in developing a horizontal holding shattered rock, ore production and delivery of scraper winch or small-sized Scooptrams. The authors suggested that such complexes can be effectively used to extract the (issue) previously rescued and orphaned stocks pillars. In order to study the process of moving the rock mass in the abatement area for its release is simulated, which resulted in recommendations. It is established that the efficiency of tunneling-final complex is provided with the release of it from one installation of 100–120 thousand tons of ore mass. The use of a mobile complex does not require fundamental changes in technology, sewage extraction of ore, but greatly simplifies the design of the system design and increases its technical and economic parameters and creates the conditions for organizing a highflow technology of ore mining.

Ключевые слова Caving mining method, moving complex, driving shield, support section, chute door, hydraulic advancing cylinder, caving simulation, underground losses and dilution, flat bottom, rib
Библиографический список

1. Bolikov V. E., Berkovich V. Kh., Balek A. E. Khromitovye mestorozhdeniya Ural'skogo regiona (Chromite deposits of the Ural region). Izv. Vuzov. Gornyy zhurnal — Mining Journal News of Higher Educational Institutions. 1997, No 3–4.
2. Bolikov V. E., Balek A. E. Issledovaniya povedeniya neustoychivykh napryazhennykh gornykh massivov pri stroitel'stve shakhtnykh stvolov (Studies of the behavior of unstable intense mine ranges in the construction of shafts). Gornyy vestnik — Mining Journal. 1995, No 4.
3. Shupletsov Yu. P. et al. Osobennosti deformatsii massiva i krepey vyrabotok na shakhte «Molodezhnaya» Donskogo GOKa: tez. dokl. mezhdunar. konf. «Geomekhanika v gornom dele» (Features of the deformation of the array and roof supports workings at the mine Molodezhnaya Don Mining and Processing Plant : abstracts of the international conference "Geomechanics in Mining"). Ekaterinburg, 1996.

Language of full-text русский
Полный текст статьи Получить
Назад