• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Chernye Metally →  2011 →  №7-8 →  Назад

Control, organization and production management
Название Automatized account of material flows using radio signals
Автор R. Miesen, J. Wittwer, M. Vossiek.
Информация об авторе Eng. R. Miesen, Scientific fellow; Eng. J. Wittwer, Scientific fellow; Prof., Dr.-Eng. M. Vossiek, Director of Institute, Mining and metallurgical cluster of automated identification systems, Institute of Technology of collection, processing and transmission of electric information, Technical university of Clausthal,  Clausthal-Zellerfeld; info@monlaid.de
Реферат

Fully automatized coil storage using radio frequency identification system (RFID) is described. Forklifts at this coil storage are equipped with RFID- and local positioning system LPR. Automated crane is also supplied with RFID antenna. Corresponding MonLAID-On-Metal Tags and their destination are described and received signal strength vs. distance reader to tag is displayed.
Ключевые слова Radio frequency identification system, coils, tags, material flow, cranes, forklifts, antenna.
Библиографический список

1. Vossiek, M.; Miesen, R.; Wittwer, J.: RF Identification and localization — recent steps towards the internet of things in metal production and processing, 18. Intern. Conf. on Microwaves, Radar and Wireless Communications MIKON-2010, Vilnius, Litauen, 16. Juni 2010, S. 272/79.
2. Jungk, A.; Overmeyer, L.: RFID Equipped Forklift Trucks, Proc. 1. Intern. EURASIP Workshop on RFID Technology, Wien, Österreich, 25. Sept. 2007, S. 75/78.
3. ETSI, Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 to 868 Mhz with power levels up to 2 W, Part 1: Technical requirements and methods of measurement, 2006.
4. Mo, L.-F.; Zhang, H.-J.; Zhou, H.-I.: Analysis of dipole-like ultra high frequency RFID tags close to metallic surfaces., J. Zhejiang University Science A 10 (2009) Nr. 8, S. 1217/22.
5. Rao, K. V. S.; Lam, S. F.; Nikitin, P. V.: Wideband metal mount UHF RFID tag, Antennas and Propagation Society Intern. Sympos., San Diego, USA, 11. Juli 2008; AP-S 2008, IEEE, 2008.
6. Redeker, M.; Balkow, B.; Langenfurth, D.: Einsatz von Elektro-Permanentmagnettechnik für die Be- und Entladung von Schiffen, stahl u. eisen 128 (2008) Nr. 8, S. 39/44.
Language of full-text русский
Полный текст статьи Получить
Назад