Журналы →  Chernye Metally →  2023 →  №11 →  Назад

80th anniversary of the dept. “Materials Processing and Additive Technologies” of Moscow Polytechnic University
Название Features of constructing a hardening curve when testing samples for uniaxial compression depending on the deformation value
DOI 10.17580/chm.2023.11.10
Автор Yu. k. Filippov, D. A. Gnevashev, Le Chung Zung
Информация об авторе

Moscow Polytechnic University, Moscow, Russia

Yu. K. Filippov, Dr. Eng., Prof ., Dept. of Materials Forming and Additive Technologies, e-mail: yulianf@mail.ru
D. A. Gnevashev, Cand. Eng., Head of the Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru
Le Chung Zung, Postgraduate Student, Dept. of Materials Forming and Additive Technologies


The dependence of the construction of the hardening curve under uniaxial compression between the measurements of the deformed metal and the stress intensity during plastic deformation is investigated and established. Graphs of the dependence of the deformation value on the stress value for steel 20 GOST 1050-2013 are constructed, thereby making it possible to predict the properties of parts obtained by cold forging. In order to construct the dependence of the strain intensity and stress intensity and to plot the hardening graph, experiments were carried out on compressing samples from the researched metal. Due to good lubrication at the ends of the sample (periodically replaced gaskets made of polyethylene film in combination with engine oil), the stress state can be considered linear. The stress state index K = 0,33, the Lode-Nadai indicator μσ = 1. To reduce the barrel shape during upsetting, the height of the samples and the diameter of the initial dimensions are within the limits 2 ≥ H0/D0 ≥ 1. Steel 20 GOST 1050-2013 was selected for the study. Hot-rolled round steel rolled according to GOST 2590-88 was used as blanks. To determine stresses at different degrees of deformation, it is possible to use an approximate mathematical expression, since the use of a graph is not always convenient and does not provide high accuracy. To obtain a mathematical expression, an approximation of the hardening curve was carried out in the Excel program. Excel has a polynomial function with a confidence value of 0.9931, for use in modeling in the QForm software package.

Ключевые слова Deformation, stress, hardening curve, steel, cylindrical sample, upsetting method, experimental tooling
Библиографический список

1. GOST 25.503–97. Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing. Introduced: 01.07.1999.
2. GOST. 1050-2013. Metal products from nonalloyed structural quality and special steels. General specification. Introduced: 01.01.2015.
3. Nadai A. Theory of flow and fracture of solids. Vol. 1. Translated from English. Moscow : Inostrannaya literatura, 1954. 648 p.
4. Kalpin Yu. G., Filippov Yu. K., Petrov P. A., Gnevashev D. A. Construction of a hardening curve at large strain values. Mechanics of deformable solids and metal forming. Part 2. Tula : TulGU, 2002. pp. 19–24.
5. Del G. D. Technological mechanics. Moscow : Mashinostroenie, 1978. 174 p.
6. Bridgeman P. W. Studies in large plastic flow and fracture. Translated from English. Moscow : Inostrannaya literatura, 1955. — 444 p.
7. Shinkin V. N. Elastoplastic flexure of round steel beams. 1. Springback coefficient. Steel in Translation. 2018. Vol. 48. No. 3. pp. 149–153.
8. Shinkin V. N. Elastoplastic flexure of round steel beams. 2. Residual stress. Steel in Translation. 2018. Vol. 48. No. 11. pp. 718–723.
9. Kalpin Yu. G., Miropolsky Yu. A., Filippov Yu. K., Pavlov N. D., Polovnikov Yu. P. Mechanical test specimen. Certificate of authorship No. 1578567 USSR. Applied: 21.06.1988. Published: 15.07.1990.
10. Isaeva A. N., Larin S. N., Platonov V. I., Korotkov V. A. Construction of an extended hardening curve by compression of composite cylindrical specimens. Chernye Metally. 2022. No. 3. pp. 65–70.
11. Galaktionova E. A., Zung L. Ch., Filippov Yu. K., Gnevashev D. A. Dependence of the hardness value on the intensity of stresses and deformations during cold forging. Chernye Metally. 2023. No. 2. pp. 45–48.
12. Tipalin S. A., Belousov V. B., Lyubetskaya S. I. Testing the cross-sectional microhardness in sheets with a 0.08% carbon concentration. Solid State Phenomena. 2021. Vol. 316. pp. 269–275.
13. Tipalin S. A., Belousov V. B., Shpunkin N. F. Investigation of uneven properties of stainless steel 12KH18N10T depending on the thickness of the sheet. Defect and Diffusion Forum. 2021. Vol. 410. pp. 28–36.
14. Kalpin Y. G., Tipalin S. A., Ryabov V. A. Aspects of superplasticity of metals. Defect and Diffusion Forum. 2021. Vol. 410. pp. 48–55.
15. Kouprianoff D., Moore K. Effect of design and tensile testing specimen geometry on final tensile properties of powder bed fusion plastic. MATEC Web of Conferences. 2022. Vol. 370. 08005.
16. Worz A., Drummer D. Understanding hatch-dependent part properties in SLS. Proceedings of the Solid Freeform Fabrication Symposium, USA, 2018. pp. 1560–1569.
17. Islam M. S., Powar P. R., Andreasson E., Petersson V. The effects of stress triaxiality on the neck initiation and fracture of high-density polyethylene (HDPE). Procedia Structural Integrity. 2022. Vol. 42. No. 12. pp. 745–754.
18. GOST 2590–88. Round steel bars. Dimensions. Introduced: 01.01.1990.

Language of full-text русский
Полный текст статьи Получить