Journals →  Tsvetnye Metally →  2022 →  #12 →  Back

MATERIALS SCIENCE
ArticleName Introduction of reinforcing microparticles of TiB2 and BN into aluminium by electromagnetic stirring
DOI 10.17580/tsm.2022.12.07
ArticleAuthor Khripchenko S. Yu., Dolgikh V. M.
ArticleAuthorData

Institute of Continuum Mechanics at the Ural Branch of the Russian Academy of Sciences, Perm, Russia:

S. Yu. Khripchenko, Lead Researcher, Professor, Doctor of Technical Sciences, e-mail: khripch@icmm.ru
V. M. Dolgikh, Senior Researcher, Candidate of Technical Sciences, e-mail: dolgikh@icmm.ru

Abstract

The paper describes an experiment in which aluminum alloy was reinforced with TiB2 and BN particles and investigates the physical properties of the resulting aluminum composite. In the experiment, TiB2 and BN reinforcing particles were introduced into molten metal as part of pellets produced from aluminum micro powder in the presence of MHD mixing with subsequent directional crystallization. The pellets were thrown into a crucible with liquid aluminum placed in the working volume of an MHD stirrer, which generated separately controlled toroidal and poloidal flows. It was found that the dissolution of the pellets prepared from the mixture of aluminum micro particles (100–150 μm) and reinforcing TiB2 micro particles (1–5 μm) under MHD stirring proceeds much better compared to the pellets with BN micro particles (1–5 μm). The pellets in which the weight percentage of BN reinforcing particles exceeds 7% poorly “dissolve” in aluminum melt, while the pellets with 10% TiB2 micro particles “dissolve” satisfactorily. Due to a large number of pellets introduced into liquid aluminum in the course of the experiment and because of the strong cooling of the melt, it was not possible to obtain the weight percentage of reinforcing micro particles in an aluminum ingot exceeding 2.5% for TiB2 micro particles and 1.4% for BN micro particles. The results of the experiment showed that the hardness and tensile strength of aluminum increase with increasing content of TiB2 and BN micro particles in a similar way, but in the case BN particles to a lesser extent. The strength and electrical resistivity of liquid aluminum reinforced with TiB2 and BN particles increase with their rising fraction.
The structural study of the specimens on electron and digital optical microscopes were carried out in compliance with the state budget subject AAAAA19-119012290101-5 of the Institute of Continuum Mechanics at the Ural
Branch of the Russian Academy of Sciences; the experiments on introduction of microparticles into molten aluminium were funded by the Government of the Perm Kray and the Russian Foundation for Basic Research under the Ural regional project No. [19-48-590001 р_а].

keywords MHD-stirring, micro particles TiB2, BN, liquid aluminum, ingot, physical properties
References

1. Debrupa Lahiri, Ali Hadjikhani, Cheng Zhang, Tan Xing et al. Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behavior. Materials Science & Engineering A. 2013. Vol. 574. pp. 149–156.
2. Borisov V. G., Kazakov А. А. New method for synthesis of metal matrix composites. Alumitech’97. Aluminum Association, Atlanta, GA, USA, 1997. pp. 191–203.
3. Kosnikov G. A., Borisov V. G. Prospective applications for new-generation cast and wrought metal-matrix composites. Foundry Business Today and Tomorrow: Proceedings of the 8th conference. St. Petersburg, 2010. pp. 64–75.
4. Borisov V. Aluminum-based composite billets produced by plasma injection and thixocasting. Light Metal Age. 2017. pp. 48–51.
5. Gelfgat Yu., Skopis M., Grabis J. Electromagnetically driven vortex flow to introduce small solid particles into liquid metal. Magnetohydrodynamics. 2005. Vol. 41, No. 3. pp. 249–254.
6. Alimova O. T., Grishanova M. S., Minaev A. A. A unit for producing molten aluminium matrix composites and castings made of them. Patent RF, No. 117439. Applied: 16.03.2012. Published: 27.06.2012.
7. Serebryakov S. P., Larionov A. Ya., Izotov V. A., Zimina M. N. Method of obtaining of composite material aluminium-carbide silicon (Al – SiC). Patent RF, No. 2348719. Applied: 20.11.2006. Published: 10.03.2009.
8. Borisov V. G., Yudakov A. A., Khripchenko S. Yu., Denisov S. A., Zaytsev V. N. Device for introduction of finely divided components into matrix metal melt. Patent RF, No. 2144573. Applied: 27.06.1995. Published: 20.01.2000.
9. Bojarevics V., Djambazov G. S., Pericleous K. A. Contactless ultrasound generation in a crucible. Metallurgical and Materials Transactions A. 2015. Vol. 46. pp. 2884–2892.
10. Grants I., Gerbeth G., Bojarevics A. Contactless magnetic excitation of acoustic cavitation in liquid metals. Journal of Applied Physics. 2015. Vol. 117. p. 204901. DOI: 10.1063/1.4921164.
11. Brodova I. G., Uimin M. A., Astafiev V.V., Kotenkov P.V. et al. Synthesis of aluminum composites with nanoscale particles of carbides and titanium diborides. Letters on Materials. 2013. Vol. 3. pp. 91–94.

12. Kaldre I., Bojarevics A. Electromagnetic contactless method for metal matrix composite production. Magnetohydrodynamics. 2020. Vol. 56, No. 2-3. pp. 325–331. DOI: 10.22364/mhd.56.2-3.24.
13. Vorozhtsov A. B., Danilov P. A., Zhukov I. A., Khmeleva M. G. et al. Effect of external factors on the melt and effect of non-metallic nanoparticles on the structure and mechanical properties of light aluminium and magnesium alloys. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2020. No. 64. pp. 91–105.
14. Khripchenko S., Dolgikh V., Kiselkov D. Experiment on injection of SIC and BN nanoparticles into liquid aluminum using MHD stirring with subsequent crystallization of the melt. IOP Publishing. Journal of Physics: Conference Series 1945. 2021. p. 012017. DOI: 10.1088/1742-6596/1945/1/012017.
15. Khripchenko S. Yu., Dolgikh V. M. Increasing the efficiency of modifying ingots made of aluminum alloy AK7 by alternately acting running and rotating magnetic fields. Tsvetnye Metally. 2021. No. 8. pp. 45–50. DOI: 10.17580/tsm.2021.08.07.
16. Denisov S., Dolgikh V., Khripchenko S., Kolesnichenko I., Nikulin L. The effect of traveling and rotating magnetic fields on the structure of aluminum alloy during its crystallization in a cylindrical crucible. Magnetohydrodynamics. 2014. Vol. 50, No. 4. pp. 249–265.
17. GOST 9012–59. (ISO 410–82, ISO 6506–81). Metals. Method of Brinell hardness measurement. Introduced: 01.01.1960.
18. GOST 1497–84. Metals. Methods of tension test. Introduced: 01.01.1986.
19. Rybakov A. D. Use of various forms of carbon for self-propagating hightemperature synthesis of highly dispersed titanium carbide in the melt while synthesizing aluminium matrix composites: PhD dissertation. Samara, 2021. 182 p.

Language of full-text russian
Full content Buy
Back