Journals →  Tsvetnye Metally →  2022 →  #12 →  Back

HEAVY NON-FERROUS METALS
ArticleName Understanding the distribution of platinum group metals and gold in the process of copper-nickel slag depletion with gas mixtures
DOI 10.17580/tsm.2022.12.02
ArticleAuthor Bogatyrev D. M., Tsymbulov L. B., Ozerov S. S.
ArticleAuthorData

Gipronikel Institute LLC, Saint Petersburg, Russia:

D. M. Bogatyrev, Junior Researcher at the Pyrometallurgy Laboratory, e-mail: BogatyrevDM@nornik.ru
L. B. Tsymbulov, Director of the Research and Development Department, Corresponding Member of the Russian Academy of Natural Sciences, Doctor of Technical Sciences, Professor, e-mail: TsymbulovLB@nornik.ru
S. S. Ozerov, Lead Researcher at the Pyrometallurgy Laboratory, Candidate of Technical Sciences, e-mail: OzerovSS@nornik.ru

Abstract

This paper describes the results of a study that looked at the distribution of platinum group metals (PGMs) (Pt, Pd, Rh, Ru, Ir) and Au between Cu – Ni – Fe bottom phase and dump slag as a result of pyrometallurgical depletion of slag, a by-product of oxidizing smelting of sulphide copper-nickel concentrate. The pyrometallurgical process was performed in a bubbling mode using reducing gas mixtures of various compositions. The consumption of reducing agent was found to be the key factor governing the output of the bottom phase and hence the chemical composition of the products. For the first time ever, the authors used the results of the chemical analysis of the products to calculate the distribution coefficients for PGMs and gold between the bottom phase versus the slag when the depletion process involved an intensive stirring of the melt. Thus, a variation range was established for the distribution coefficients of noble metals, as well as the threshold concentration of Fe in the melt. Once the latter has been reached, the distribution coefficients remain almost unchanged and the extraction of PGMs into dump slag is minimal. Using scanning electron microscopy and electron probe microanalysis, the authors established how many noble metals get carried away with dump slag. Proneness of Au to get dissolved in silicate melts was revealed, which is also typical of Cu. The conducted study helped establish that only 5% of Pt, Pd and Rh gets carried away with dump slag, which is the least loss. At the same time, about 10% of Ru and Ir goes into dump slag. The data reflecting the behavior of Au during slag depletion with reducing gas mixtures confirm that the maximum recovery of this metal from the slag would only be possible under a high reduction potential of the system. This corresponds to the minimum concentration of Fe in the bottom phase of 50% wt.

keywords Distribution coefficient, copper-nickel mattes, platinum group metals, gold, dump slag, Vanyukov furnace, flash smelting
References

1. Avarmaa K., O'Brien H., Taskinen P. Equilibria of gold and silver between molten copper and FeOx – SiO2 – Al2O3 slag in WEEE smelting at 1300 oC. Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. 2016. pp. 193–202. DOI: 10.1007/978-3-319-48769-4_20.
2. Avarmaa K., O’Brien H., Johto H., Taskinen P. Equilibrium distribution of precious metals between slag and copper matte at 1250–1350 oC. Journal of Sustainable Metallurgy. 2015. Vol. 1. pp. 216–228. DOI: 10.1007/s40831-015-0020-x.
3. Piskunen P., Avarmaa K., O’Brien H., Klemettinen L., Johto H., Taskinen P. Precious metal distributions in direct nickel matte smelting with low-Сu mattes. Metallurgical and Materials Transactions B. 2018. Vol. 49, Iss. 1. pp. 98–112. DOI: 10.1007/s11663-017-1115-5.
4. Avarmaa K., O’B rien H., Klemettinen L., Taskinen P. Precious metal recoveries in secondary copper smelting with high-alumina slags. Journal of Material Cycles and Waste Management. 2020. Vol. 22. pp. 642–655. DOI: 10.1007/s10163-019-00955-w.
5. Klemettinen L., Avarmaa K., Taskinen P. Slag chemistry of high-alumina iron silicate slags at 1300 oC in WEEE smelting. Journal of Sustainable Metallurgy. 2017. Vol. 3. pp. 772–781. DOI: 10.1007/s40831-017-0141-5.
6. Sukhomlinov D., Taskinen P. Distribution of Ni, Co, Ag, Au, Pt, Pd between copper metals and silica saturated iron silicate slag. Thermodynamic in vestigation of complex inorganic material systems for improved renewable energy and metals production processes: Proceedings of the European Metallurgical Conference (EMC). 2017. Vol. 3. pp. 1029–1038.

7. Avarmaa K., Johto H., Taskinen P. Distribution of precious metals (Ag, Au, Pd, Pt, and Rh) between copper matte and iron silicate slag. Metallurgical and Materials Transactions B. 2016. Vol. 47. pp. 244–255. DOI: 10.1007/s11663-015-0498-4.
8. Avarmaa K., Klemettinen L., O'Brien H., Taskinen P. Urban mining of precious metals via oxidizing copper smelting. Minerals Engineering. 2019. Vol. 133. pp. 95–102. DOI: 10.1016/j.mineng.2019.01.006.
9. Sukhomlinov D., Klemen ttinen L., Avarmaa K., O’Brien H., Taskinen P. et al. Distribution of Ni, Co, precious and platinum group metals in copper making process. Metallurgical and Materials Transactions B. 2019. Vol. 50. pp. 1752–1765. DOI: 10.1007/s11663-019-01576-2.
10. Tsemekhman L. Sh., Tsymbulov L. B., Pakhomov R. A., Popov V. A. Behavior of platinum metals during sulfide copper-nickel raw materials processing. Tsvetnye Metally. 2016. No. 11. pp. 50–56. DOI: 10.17580/tsm.2016.11.05.
11. Ertseva L. N. Understanding the solid phase transformations taking place in sulphide copper-nickel material when it is heated up and improved processes developed on the basis of the obtained data: Extended abstract of doctoral dissertation. Moscow : Gintsvetmet, 2001. 40 p.
12. Ertseva L. N., Starykh R. V., Tsemekhman L. Sh. Peculiarities of material composition of residues of chlorine dissolution of nickel cinder and its melting products with matte obtaining. Tsvetnye Metally. 2015. No. 2. pp. 36–41.
13. Bogatyrev D. M., Petrov G. V., Tsymbulov L.B. Pyrometallurgical technologies for processing sulfide copper-nickel ores with a high content of platinum group metals: current state and prospects of development. Vestnik of Nosov Magnitogorsk State Technical University. 2022. Vol. 20, No. 1. pp. 14–24. DOI: 10.18503/1995-2732-2022-20-1-14-2.
14. Ozerov S. S., Tsymbulov L. B., Eroshevich S. Yu., Gritskikh V. B. Looking at the changing composition of blister copper obtained through continuous converting. Tsvetnye Metally. 2020. No. 12. pp. 64–69. DOI: 10.17580/tsm.2020.12.09.
15. Tsemekhman L. Sh., Fomichev V. B., Ertseva L. N., Kaytmazov N. G., Kozyrev S. M. et al. Atlas of mineral raw materials, technological industrial products and marketable products of the Polar Division OJSC MMC “Norilsk nickel”. Moscow : “Ore and Metals” Publishing House, 2010. 336 p.
16. Cole S., Ferron C. J. A review of the beneficiation and extractive metallurgy of the platinum group elements, highlighting recent process innovations. SGS Minerals Services Technical Paper. 2002-03. pp. 1–43.
17. Pigarev S. P. The structure and properties of slags from the process of continuous converting of copper-nickel mattes and concentrates: Candidate of Technical Sciences dissertation. Saint Petersburg, 2013. 209 p.
18. Shuto H., Okabe T. H., Morita K. Ruthenium solubility and dissolution behavior in molten slag. Materials Transactions. 2011. Vol. 52, Iss. 10. pp. 1899–1904. DOI: 10.2320/matertrans.M-M2011821.
19. Fonseca R. O. C., Mallmann G., O’Neill H. St. C., Campbell I. H., Laurenz V. Solubility of Os and Ir in sulfide melt: Implications for Re/Os fractionation during mantle melting. Earth and Planetary Science Letters. 2011. Vol. 11. pp. 339–350. DOI: 10.1016/j.epsl.2011.09.035
20. Laurenz V., Fonseca R. O. C., Ballhaus C., Jochum K. P., Heuser A. et al. The solubility of palladium and ruthenium in picritic melts: 2. The effect of sulfur. Geochimica et Cosmochimica Acta. 2013. Vol. 108. pp. 172–183. DOI: 10.1016/j.gca.2013.01.013
21. Kotlyar Yu. A., Meretukov M. A., Strizhko L. S. Metallurgy of noble metals : Textbook in 2 books. Book 2. Moscow : “Ore and Metals” Publishing House, 2005. 392 p.

Language of full-text russian
Full content Buy
Back