Journals →  CIS Iron and Steel Review →  2022 →  #1 →  Back

Ironmaking
ArticleName Comprehensive index of compound blast furnace smelting
DOI 10.17580/cisisr.2022.01.02
ArticleAuthor P. I. Chernousov, A. E. Karpalev, A. V. Kramar, V. O. Podusovskiy
ArticleAuthorData

National University of Science and Technology “MISiS” (Moscow, Russia):

P. I. Chernousov, Cand. Eng., Associate Prof., e-mail: p.chernou@yandex.ru
A. E. Karpalev, Graduate Student
A. V. Kramar, Master’s Degree Student
V. O. Podusovskiy, Graduate Student

Abstract

An actual direction in the development of blast-furnace smelting technology is the implementation of stable operating modes of blast furnaces in terms of the parameters of the used charge materials and hot combined blast. For this purpose, complex indicators characterizing the thermal and reduction modes of blast furnace smelting, and integral indicators of iron ore raw materials (IORM) quality are being studied. The object of the study is the blast furnace process under the conditions of PJSC NLMK. The database of the main indicators of the operation of blast furnaces No. 4, 6 and 7 for the period 2013–2018 was analyzed. The furnaces operate under raw material conditions, with similar combined blast parameters and coke consumption. When the consumption of natural gas, pulverized coal and process oxygen changes, the values of the degree of compensation (the ratio of the consumption of reducing additives to the consumption of process oxygen) are in the range of 0.9–1.1. This provides a constant level of hearth heating, stability of the gas-dynamic mode of melting and coke consumption. At the same time, the different level of development of the processes of indirect (Ri) and direct (rd) reduction in blast furnaces No. 4, 6 and 7 makes it possible to perform correct studies of the features of blast furnace smelting in a wide range of Ri and rd values. It has been established that under the conditions of stable operation of blast furnaces on raw materials from sinter and pellets using combined blast, the type of dependence of the sulfur and silicon content in pig iron on the values of the integrated iron ore raw materials quality index is determined by degree development level of direct reduction processes rd. It has been established that the mode of blast furnace smelting with natural gas, pulverized coal and process oxygen, characterized by the level of rd values less than 20–25 %, is distinguished by the presence of a pronounced extreme dependence of coke consumption and productivity on the parameters of the combined blast.

keywords Blast furnace smelting, iron ore raw materials, combined blast, pulverized coal fuel, integral indicator, degree development level of direct reduction processes, chemical composition of pig iron
References

1. Lüngen H. B., Shmöle P. Comparative operating parameters of blast furnaces worldwide. Chernye metally. 2019. No. 3, pp. 13–18.
2. Dmitriev A. N., Zolotykh M. O., Vitkina G. Yu, Improvement of sinter and coke production using digital technologies within the framework of Industry 4.0. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2020. Vol. 76. No. 4. pp. 339–345.
2. Kurunov I. F., Titov V. N., Emelyanov V. L. et al. Influence of the quality of iron ore raw materials and coke on the performance of blast furnaces in the conditions of JSC NLMK. Metallurg. 2010. No. 1. pp. 28–34.
3. Lyalyuk V. P., Sheremet V. A., Tarakanov A. K. et al. Influence of composition and quality of iron ore raw materials on technical and economic indicators. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2010. No. 12. pp. 32–38.
4. Chernousov P. I., Seregin S. N., Grishin R. E. et al. Integral indicator of iron ore raw materials quality and forecasting the composition of pig iron. Metallurgist. 2021. No. 11. pp. 90–96.
5. Chernousov P. I., Seregin S. N., Grishin R. E., Chikaleva A. N. Investigation of the blast furnace process using multicomponent blast. Chernye metally. 2021. No. 12. pp. 4–10.
6. Filatov S. V., Kurunov I. F., Titov V. N. et al. Implementation of energy efficient solutions for iron smelting at PJSC NLMK. Metallurgist. 2019. No. 4. pp. 25–28.
7. Filatov S. V., Dagman A. I., Titov V. N., Energy efficient technology of pig iron smelting in PJSC NLMK. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2019. Vol. 75. No. 1. pp. 32–36.
8. Sorokin A. Yu., Pishikin A. A., Dagman A. I. et al. Mastering the technology of blast furnace smelting of pig iron using pulverized coal fuel in the blast furnace shop No. 2 of PJSC NLMK. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2019. Vol. 75. No. 7. pp. 803–809.
9. Filatov S. V., Listopadov V. S., Sorokin A. Yu. Et al. Technologies for blast furnace iron smelting using pulverized coal fuel at PJSC NLMK. Metallurgist. 2020. No. 5. pp. 10-14.
10. Vegman E. F., Zherebin B. N., Pohvisnev A. N. et al. Pig iron metallurgy: Textbook for universities. Moscow : Akademkniga. 2004. p. 774.
11. Pichkalev A. V. Generalized Harrington desirability function for comparative analysis of technical means. Issledovaniya naukograda. 2012. No. 1. pp. 25-28.
12. Togobickaya D. N., Belkova A. I., Stepanenko D. A. et al. Generation of complex indicator of blast furnace charge, taking into account its mineralogy for the directed formation of smelting products. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2015. No. 2. pp. 26–33.
13. Togobickaya D. N., Belkova A. I., Stepanenko D. A. et al. A systematic approach to the choice of charge composition for the purpose of directed formation of smelting products. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2016. No. 1. pp. 25–31
14. Dmitriev A. N., Shumakov N. S., Leontyev L. I. Et al. Fundamentals of the theory and technology of blast furnace smelting. Ekaterinburg: Ural branch of the Russian Academy of Sciences. 2005. 545 p.
15. Geerdes M., Chenyo R., Kurunov I. et al. Modern blast furnace process. Moscow : Metallurgizdat. 2016. 280 p.
16. Yaroshevskiy S. L., Tereshchenko V. P., Afanasyeva Z. K. Experience in the development of pulverized coal technology at the Donetsk Metallurgical Plant. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2007. No. 5. pp. 22–28.
17. Andronov V. N. Extraction of ferrous metals from natural and technogenic raw materials. Blast furnace process. Donetsk: Nord-Press, 2009. 377 p.
18. Andronov V. N. The minimum possible consumption of coke and the impact on it of various factors of blast furnace smelting. A textbook. St. Petersburg: SpbGTU. 2001. 142 p.
19. Dunaev N. E., Kudryavtseva Z. M., Kuznetsov Yu. M. Injection of pulverized materials into blast furnaces. Moscow : Metallurgiya. 1977. 208 p.
20. Chernobrivets B. F., Kaporulin V. V., Zavidonskiy V. A., Practice of blast furnace production. Moscow : Metallurgiya. 1992. 111 p.
21. Sibagatullin S. K., Druzhkov V. G., About role of direct reduction of iron from oxides in a blast furnace. Stal. 1996. No. 8. pp. 9–13.
22. Ryzhenkov A. N., Yaroshevskiy S. L., Krikunov B. P. et al. Melting technology using pulverized coal fuel and natural gas on an oxygen-enriched blast. Stal. 2005. No. 12. pp. 13–17.
23. Minaev A. A., Ryzhenkov A. N., Bannikov Yu. G. et al. Prospects for the use of pulverized coal fuel in blast furnaces in Ukraine and Russia. Stal. 2008. No. 2. pp. 5–11.
24. Kurunov I. F., Filatov S. V., Tikhonov D. N. et al. Intensity of blast furnace melting and efficiency of indirect reduction. Stal. 2016. No. 8. pp. 26–31.
25. Pukhov A. P., Chernousov P. I., Yusfin Yu. S. et al. Efficiency of oxygen use at different proportions of pellets in the charge. Stal. 1985. No. 1. pp. 5–9.
26. Yusfin Yu. S., Pukhov A. P., Sysoev N. F. et al. Efficiency of blast furnace melting with variable oxygen content in the blast under modern conditions. Stal. 1992. No. 3. pp. 4–7.
27. Yusfin Yu. S., Rozhavskiy L. A., Chernousov P. I. Calculation of recovery processes parameters in blast furnace. Izvestiya vuzov. Chernaya metallurgiya. 1992. No. 7. pp. 8–11.
28. Yusfin Yu. S., Chernousov P. I., Travyanov A. Ya. Theoretical calculation of maximum possible use degree of gas reducing ability in blast furnace. Izvestiya vuzov. Chernaya metallurgiya. 1996. No. 1. pp. 9–11.
29. Pukhov A. P. Development and mastering ways to increase the stability of blast furnace process under the conditions of using a blast with a high oxygen content in order to increase the efficiency of melting. Dissertation … for Candidate of technical sciences. Dnepropetrovsk. 1987. 204 p.

Full content Comprehensive index of compound blast furnace smelting
Back