Журналы →  Non-ferrous Мetals →  2020 →  №2 →  Назад

AUTOMATION
Название Methods and means of increasing operation efficiency of the fleet of electric motors in non-ferrous metallurgy
DOI 10.17580/nfm.2020.02.09
Автор Kurilin S. P., Dli M. I., Rubin Y. B., Chernovalova M. V.
Информация об авторе

Branch of the National Research University “Moscow Power Engineering Institute”, Smolensk, Russia:

S. P. Kurilin, Professor, Department of Electromechanical Systems, e-mail: sergkurilin@gmail.com

M. I. Dli, Professor, Head of the Department of Information Technologies in Economics and Management, e-mail: midli@mail.ru

 

Moscow University for Industry and Finance “Synergy”, Moscow, Russia:

Y. B. Rubin, Professor, Head of the Department of Theory and Practice of Competition

 

National Research University “Moscow Power Engineering Institute”, Moscow, Russia:

M. V. Chernovalova, Post-Graduate Student, e-mail: 0208margarita@bk.ru

Реферат

Arranging efficient operation of the fleet of induction motors (IM) in non-ferrous metallurgy is a large-scale technical and economic problem. In scientific aspect, the problem is being solved in the framework of two research lines: in developing criteria for the efficient operation of the branch IM fleet and towards the development of methods and tools for implementing the IM fleet efficient operation. The article presents the results of the authors’ work in the mentiond areas. The basis for developing criteria for efficient operation is modeling of current operational states, taking into account the IM operational aging processes. The existing methods and models are poorly focused on fixation of the changes caused by operational aging. There exists a demand for special methods and tools for modeling the IM operational conditions. A mathematical model based on Kolmogorov equations is one of these tools. The system graph and equations of the mathematical model are given. An example of a practical calculation of the no-failure operation probabilities at different rates of repair operations is given. It is stated that the offered mathematical model can serve as an instrument for developing criteria of the IM pool efficient operation. The system of periodic operational diagnostics is ment to be a key element in enhancement of the IM fleet operation efficiency. A topological method worked out for the problems of operational diagnostics is focused upon analyzing the dynamics of operational changes taking place in the IM vector space. The matrix of current deviations is a medium of objective and reliable information about the current IM technical condition. Matching the matrices of current and limiting deviations allows us to make several essential conclusions concerning the IM technical state.

The reported study was funded under as a part of state assignment (project number, FSWF-2020–0019), as well as at the expense of RFBR (project number, 20-01-00283).

Ключевые слова Induction motor, operational aging, efficient operation, reliability, Kolmogorov equations, topological method, periodic operational diagnostics
Библиографический список

1. Ermakov K. S., Kransutskaya A. A., Tumakova E. V. Measuring Support and Diagnostics of the Operation of Electromechanical Systems Using the Phase-Chronometric Method. Instruments. 2018. No. 5. pp. 33–38.
2. Stepanov V. M., Svistunov N. A. Diagnostics and Management of the Operation Modes of Electromechanical and Electrical Systems with Autonomous Sources of Electrical Energy for Gas Distribution Network. Izvestiya TulGU. Tekhnicheskie nauki. 2018. No. 12. pp. 96–99.
3. Tumakova E. V., Komshin A. S. Development Prospects and Main Problems in the Field of Diagnostics of Electromechanical Systems. The Future of Mechanical Engineering in Russia : Collection of Reports of the Eighth Conference of Young Scientists and Specialists. 2015. pp. 137–140.
4. Shprekher D. M., Kolesnikov E. B. The Remote Method of Diagnosing the Technical Condition of Complex Electromechanical Systems. 2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). DOI: 10.1109/FarEastCon.2018.8602600
5. Ming Yu, Mengxin Li. Fault Detection and Isolation in a Nonlinear Electromechanical System. 2017 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC). 2017. DOI: 10.1109/sdpc.2017.58
6. Veresnikov G. S., Skryabin A. V. The Electromechanical Actuator Technical Condition Monitoring System Based on Data Mining Methods. 2018 Eleventh International Conference “Management of Large-Scale System Development” (MLSD). 2018. DOI: 10.1109/mlsd.2018.8551829
7. Moon J., Leeb S. B. Wire Less Sensors for Electromechanical Systems Diagnostics. IEEE Transactions on Instru mentation and Measurement. 2018. Vol. 67, Iss. 9. pp. 2235– 2246.

8. Kalugin M. V., Biyukov V. V. Diagnostics and Reliability of Electromechanical Systems of the Transport Complex. Novosibirsk : Izdatelstvo NGTU, 2018. 232 p.
9. Chinmaya B., Galiveeti H. R., Pranju C., Arup K. G., Chandra P. G., Girish K. S. Assessment of Equipment Trip Probability Due to Voltage Sags Based on Fuzzy Possibility Distribution Function. IEEE Access. 2018. Vol. 6. pp. 76889–76899.
10. Miroshin R. N., Barinova O. V. Particular Solutions of Chapman-Kolmogorov Equation And Their Connection With Equatios of Mathematical Physics. Natural and Mathematical Sciences in the Modern World: Proceedings of the XLIV International Scientific-Practical Conference. 2016. Iss. 42, No. 7. pp. 126–138.
11. Rahman P. A. Availability Factor of Data Processing System with Primary and Backup Nodes. International Journal of Applied and Fundamental Research. 2015. No. 9. pp. 608–611.
12. Kravchik A. E., Shlaf M. M., Afonin V. I., Sobolenskaya E. A. Induction Motors of the 4A Series. Reference Book. Moscow : Energoizdat, 1982. 504 p.
13. Kurilin S. P., Denisov V. N., Fedulov A. S., Dli M. I. Scientific Basis of Methods for Topological Diagnostics of Asynchronous Electric Machines. AIP Conference Proceedings. MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2018): Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. 2018. Vol. 2053. 030031. DOI: 10.1063/1.5084392
14. Kurillin S. P., Denisov V. N., Dli M. I., Bobkov V. I. Vector Space As An Area Of The Operation Risks Characteristics For Asynchronous Electric Machines. Journal of Physics: Conference Series. 2019. Vol. 1260. 052017. DOI: 10.1088/1742-6596/1260/5/052017
15. Kurilin S. P., Denisov V. N., Dli M. I., Bobkov V. I. A Method for the Operational Diagnostics of Induction Motors. AIP Conference Proceedings. MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2019): Proceedings of the 13th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. 2019. Vol. 2176. 040008. DOI: 10.1063/1.5135157

Полный текст статьи Methods and means of increasing operation efficiency of the fleet of electric motors in non-ferrous metallurgy
Назад