Журналы →  Chernye Metally →  2020 →  №10 →  Назад

Refractories and Ceramics
Название Possibility of obtaining heat-resistant structures in ZrO2-based ceramics
Автор E. A. Korableva, D. V. Kharitonov, D. O. Lemeshev, A. I. Zhukova
Информация об авторе

ONPP “Technologiya” named after A. G. Romashin (Obninsk, Russia):

E. A. Korableva, Leading Engineer Technologist, e-mail: korablea@mail.ru
D. V. Kharitonov, Deputy Director on Production

 

D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

D. O. Lemeshev, Cand. Eng., Associate Prof., Dean of the Faculty of Technology of inorganic substances and high-temperature materials

 

RUDN University (Moscow, Russia):

A. I. Zhukova, Cand. Chem., Associate Professor, Deputy Dean of the Faculty of Physical-Mathematical and Natural Sciences

Реферат

Today, additive technologies are becoming widespread, and metallurgy is leading in this direction. However, the use of such technologies creates new requirements for ceramic materials used in ferrous metallurgy. Particular attention is paid to the ability of the material to withstand sudden heating to high temperatures and subsequent rapid cooling. The authors considered the possibility of obtaining heat-resistant ceramics from a powder system based on ZrO2 with a controlled structure of particles and pore space for the wide use in contact with melts of steels and alloys. In the production of ceramics, the main tasks were to create a pore structure that prevents the propagation of cracks and the formation of a main crack, as well as the formation of a fine-crystalline structure that reduces the rate of crack propagation. Bushings made of ceramics of the zirconium dioxide - magnesium oxide system, which are optimal in their parameters for use as nozzles and pipes through which the metal melt passes during spraying and obtaining powders during the implementation of additive technologies, have been investigated. In the course of the experiment, bushings with different values of open porosity were made by cold isostatic pressing (CIP). As a criterion for heat resistance, the number of heat cycles was chosen, which the material can withstand without destruction when the workpiece is cooled in running water after heating in a furnace (thermal shock). Thermal shock tests showed that the bushings with open porosity in the range of 8–10 % turned out to be the most heat-resistant: the bushings withstood 11–12 thermal cycles (1200°C, water) without destruction. The microstructure of workpieces with different values of open porosity is investigated, the features of the morphology of particles and pores in the sintered structure are shown, and the evolution of the phase composition of the sintered ceramics is established.

Ключевые слова Heat-resistant structure, heat-resistant ceramics, polymorphic transformations of crystalline phases, ceramics based on zirconium dioxide, zirconium dioxide, partially stabilized zirconium dioxide, melts of steels and alloys
Библиографический список

1. Rutman D. S., Toropov Yu. S., Pliner S. Yu. et. al. High temperature zirconia materials. Moscow: Metallurgiya, 1985. pp. 112–115.
2. Skorokhod V. V., Gnesin G. G. Inorganic Materials Science. Kiev: Naukova dumka, 2008. pp. 746–747.
3. Yakushkina V. S., Korabloyva E. A., Vikulin V.V., Rusin M. Yu., Savanina N. N. Solid electrolyte sensors for the control of liquid and gaseous media. Proceedings of the third international conference on precious metals. 2008. pp. 172, 173
4. Yakushkina V. S., Korabloyva E. A., Vikulin V.V., Rusin M. Yu., Savanina N. N. Ceramics made of nanostructured zirconium dioxide powders for high-temperature electrochemical devices. Proceedings of the International scientific and practical conference "Nanotechnologies – production 2007". Moscow: Nanoindustriya, 2008. pp. 259–364.
5. Promakhov V. V., Zhukov I. А., Vorozhtsov S. А. Heat-resistant ceramic composites based on zirconium dioxide. Novye ogneupory. 2015. No. 11. pp. 39–44.
6. Glymond D., Vick M. J., Giuliani F., Vandeperre L. J. High-temperature fracture toughness of mullite with monoclinic zirconia. J. Am. Ceram. Soc. 2017. Vol. 100, Iss. 4. pp. 1570–1577.
7. Aragón-Duarte M. C., Nevarez-Rascón, Esparza-Ponc H. E. Nevarez-Rascón M. M., Talamantes R. P. et al. Nanomechanical properties of zirconia-yttria and alumina zirconia-yttria biomedical ceramics, subjected to low temperature aging. Ceramics International. 2017. Vol. 43, Iss. 5. pp. 3931–3939.
8. Pfeifer S., Demirci P., Duran R., Stolpmann H. Synthesis of zirconia toughened alumina (ZTA) fibers for high performance materials. Journal of the European Ceramic Society. 2016. Vol. 36, Iss. 3. pp. 725–731.
9. Meunier C., Zuo F., Peillon N., Saunier S. In situ study on microwave sintering of ZTA ceramic: Effect of ZrO2 content on densification, hardness, and toughness. J. Am. Ceram. Soc. 2017. Vol. 100, Iss. 3. pp. 929–936.
10. Maiti P., Bhattacharya M., Das P. S. Indentation size effect and energy balance issues in nanomechanical behavior of ZTA ceramics. Ceramics International. 2018. Vol. 44, Iss. 8. pp. 9753–9772.
11. Kumagai T. Hot extrusion of nanocrystalline yttria-stabilized tetragonal zirconia polycrystals. Journal of Materials Research. 2016. Vol. 31, Iss. 21. pp. 3290–3302.
12. Korableva Е. А., Kharitonov D. V., Anashkina А. А., Lemeshev D. О. Creation of heat-resistant nanostructure ceramics in ZrO2 – MgO system. Tsvetnye Metally. 2019. No. 10. pp. 61–66.
13. GOST 7875.2–2018. Refractory products. Method for determination of thermal shock resistance on samples. Introduced: 01.04.2019.
14. GOST 2409–2014. Refractories. Method for determination of bulk density, apparent and true porosity, water absorption. Introduced: 01.09.2015.

Language of full-text русский
Полный текст статьи Получить
Назад