Journals →  Tsvetnye Metally →  2020 →  #4 →  Back

NOBLE METALS AND ALLOYS
ArticleName Electrochlorination as the basis for an efficient technique for extracting platinoids from spent diesel catalysts
DOI 10.17580/tsm.2020.04.03
ArticleAuthor Antonov A. A., Titts A., Samotaev N. N., Kirichenko A. S.
ArticleAuthorData

Tekhnoatom JSC, Moscow, Russia:

A. A. Antonov, Senior Researcher, Candidate of Technical Sciences, mobile: +7-903-722-07-05

 

ReMetall AG, Drochov, Germany:
A. Titts, Chairman of the Board


National Research Nuclear University MEPhI, Moscow, Russia:

N. N. Samotaev, Associate Professor, Candidate of Technical Sciences

 

National Research Nuclear University MEPhI, Moscow, Russia1 ; I. P. Bardin Science Institute for Ferrous Metallurgy, Moscow, Russia2:
A. S. Kirichenko, Engineer1, Researcher2

Abstract

This paper considers some advanced recycling techniques for spent auto catalysts, as well as the main drawbacks related to their utilization in industry. Electrochlorination is proposed as the basic recycling technique for secondary platinoids. 10 tons of spent catalysts were recycled as part of the tests. Research data on extraction of platinum, palladium and rhodium have been analyzed. The recovery figures reached for Pt, Pd and Rh were 97, 97 and 80%, correspondingly. The main drawbacks of the conventional electrochlorination process include a long process of platinoid electrodeposition (up to 50 hours), the need for thermal pre-activation of platinoids, a technical difficulty related to electrolyte circulation when the material is finely dispersed, a low recovery of rhodium (80%), and disposal of waste electrolyte. The conventional electrochlorination process has been optimized, and thus a new highly efficient and environmentally friendly process has been developed enabling a high recovery of platinoids with no need for thermal pre-activation. The originality of the proposed process is that two independent electrodeposition processes (involving direct and alternating current with variable frequency) overlap amid forced, continuous and complete overcondensation of electrolyte resulting in a superadditive effect. The use of direct and alternating current from different sources helped achieve a higher recovery of platinoids (Pt, Pd and Rh — 98, 98 and 90%, respectively) by loosening their passive forms with atomic chlorine and thus skipping the thermal pre-activation stage. Through forced evaporation and overcondensation of electrolyte in a separate container, the authors were able to increase the rate of platinoid electrodeposition and obtain treated solutions which could be re-used saving the need for electrolyte circulation. The full treatment cycle took 6-8 hours. The authors elaborate on the prospective development of the new process, which will create a breakthrough in spent catalyst recycling.
This research was funded by the Ministry of Higher Education and Science of the Russian Federation (Grant Agreement No. 14.575.21.0153 dated 26/09/2017; ID: RFMEFI57517X0153).

keywords Spent auto catalyst, extraction, platinum group metals, electrochlorination, direct current, alternating current, recycling, electrolyte, sustainability, efficiency, performance
References

1. Summary of Platinum. Supply and Demand in 2017. PGM Market Report February 2018. Available at: http://www.platinum.matthey.com/documents/new-item/pgm%20market%20reports/pgm_market_report_february_2018.pdf.
2. Jha M. K., Lee J.-C., Kim M.-S., Jeong J. et al. Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy. 2013. Vol. 133. pp. 23–32.
3. Sonkin V. S., Kovalev S. V., Gelman G. E., Muraleev A. R., Maganov D. D. Method of platinum-group metals extraction from spent catalysts on carriers out of aluminium oxide. Patent RF, No. 2564187. Published: 27.06.2015. Bulletin No. 18.
4. Maksimov V. I. Electrochlorination as a method of comprehensive recovery of metals. Moscow : Metallurgiya, 1955.
5. Kiselev M. Yu. Use of electrochemical chlorination to extract gold from gold-bearing sulphide products: Understanding the regularities and process development : Abstract of PhD dissertation. Yekaterinburg : Uralskiy gosudarstvennyi universitet, 2012.
6. Konik K. P., Kuzas E. A., Lobko S. V., Naboychenko S. S. Electrochlorinator for dissolution of placer platinum. Tsvetnye Metally. 2016. No. 12. pp. 20–26.
7. Antonov A. et al. Electrochemical technology of platinoid extraction from the automobile catalysts. 7th International Business Conference “Russian Precious Metals and Gemstones Market. Moscow, 2004.
8. Antonov A. A. et al. Electrochemical technology of platinoid extraction from the automobile catalysts. Proceedings: Environmental aspects related to mining and production of precious metals. Moscow : Komitet po ekologii i okhrane okruzhayushchey sredy Gosudarstvennoy Dumy RF, 2004.
9. Chernyshova O. V., Chernyshov V. I. Extraction of rhenium and platinum from the dead reforming catalyst by electrochemical hydrochlorination. Tsvetnye Metally. 2013. No. 1. pp. 71–75.
10. Upadhyay A. K., Lee J.-C., Kim E.-Y., Kim M.-S. et al. Leaching of platinum group metals (PGMs) from spent automotive catalyst using electro generated chlorine in HCl solution. Journal of Chemical Technology and Biotechnology. 2013. Vol. 88, No. 11. pp. 1991–1999.
11. Kim M.-S., Park S.-W., Lee J.-C., Kumar P. A novel zero emission concept for electrogenerated chlorine leaching its application to extraction of platinum group metals from spent automotive catalyst. Hydrometallurgy. 2016. Vol. 159. pp. 19–27.
12. Antonov A. et al. The effective method of platinoids extracting from spent automotive catalysts, which is based on the electrochlorination. Collection of Reports 30th ISTC Korea Workshop. Seoul, 14–18 October 2013. pp. 45–50.
13. Antonov A. A., Morozov A. V., Kryshchenko K. I. Technology of removal of noble metals. Patent RF, No. 2198947. Published: 10.08.2002.
14. Antonov A. A., Morozov A. V., Novikov A. A., Sapelkin V. S. An electrochemical method for extraction of noble metals. Patent RF, No. 2540251. Published: 10.02.2015. Bulletin No. 4.

Language of full-text russian
Full content Buy
Back