Журналы →  Tsvetnye Metally →  2020 →  №4 →  Назад

Название Automatic control system for optimum control over converter matte grinding process: development and implementation
DOI 10.17580/tsm.2020.04.01
Автор Zhidovetskiy V. D., Kuzyakov A. V.
Информация об авторе

Kola Mining and Metallurgical Company JSC, Monchegorsk, Russia:

V. D. Zhidovetskiy, Principal Specialist, Automation Office, Tel.: +7 (81536) 7-98-07


Soyuztsvetmetavtomatika JSC, Moscow, Russia:
A. V. Kuzyakov, Senior Researcher


An automatic system has been developed and implemented for optimum control over converter matte grinding in a ball mill. This work provided a step to a new level of control: from automated control (when a process person assigns tasks to controllers) to automatic control (when the optimum control system itself calculates and assigns tasks to local controllers). It is shown that control inputs are generated amid uncontrolled disturbance and the lack of full information about the grinding process status. However, when using methods of direct search for optimum process parameters, even limited information available from process monitoring instruments make the system invariant with respect to uncontrolled disturbance, and it is almost always stable within a broad range of all variables governing the grinding process. The implementation of the automatic optimum control system included introduction of a granulometer PIK-074P designed to continuously monitor the concentration of 45 μm product and finer (20 μm) particles in the slurry discharged from the spiral classifier. The difficulty lay in the fact that the slurry contains foreign objects, such as wood chips, pieces of plastic, rubber, polyethylene film, and pebbles. Besides, the solid part of the slurry tends to settle and accumulate in the discharge box, in which the granulometer is installed. A new design solution was found for the discharge box, which proved effective. As a result, the right environment was created to ensure failure-free operation of the PIK-074P granulometer installed where the slurry flows over the baffle of the spiral classifier. To prevent the slurry from sticking to the working surfaces of the granulometer that look on the slurry flow, a spray system was installed to spray the bottom of the granulometer with filtered water. The transfer to automatic optimum control of the grinding process opens up new opportunities for downstream optimization.

Ключевые слова Automatic system, optimum control, information, mathematical model, controller, grinding, process, mill, converter matte
Библиографический список

1. Boybutaev S. B. Ore grinding control system. Sovremennye materialy, tekhnika i tekhnologii. 2016. No. 5. pp. 20–27.
2. Ulitenko K. Ya., Sokolov I. V., Markin R. P., Naydenov A. P. Grinding process automation in ore concentration and metallurgical production. Tsvetnye Metally. 2005. No. 10. pp. 54–59.
3. Malyarov P. V. Ore preparation machinery and technology: Current status and development prospects. Important Problems Related to Comprehensive Processing of Refractory Ores and Man-Made Materials (Plaksin Readings –2017): Proceedings of the international meeting. Krasnoyarsk, 2017. pp. 29–35.
4. Louw D. G., Hulbert V. C., Smith А., Singh G. C. et al. Intek`s process control tools for milling and flotation control. Proceedings of the ХХII International Mineral Processing Congress. Cape Town, South Africa, 14–29 September 2003. Vol. 1. pp. 201–216.
5. Besedovskiy S. G., Zhidovetskiy V. D., Ivanov V. A., Kozyrev V. F. et al. Separation of copper-nickel converter matte at Kola MMC: Process optimization. Tsvetnye Metally. 2004. No. 12. pp. 28–31.
6. King R. P. A model for quantitative estimation of mineral liberation by grinding. International Journal of Mineral Processing. 1979. Vol. 6. pp. 207–220.
7. Morozov V. P., Topchaev V. P., Ulitenko K. Ya., Ganbaatar Z. et al. Deve lopment and application of automated systems of control of mineral dressing processes. Moscow : “Ore and Metals” Publishing House, 2013. 507 p.
8. Ulitenko K. Ya. Control over wet grinding and classification modes in modern process control systems. Obogashchenie Rud. 2008. No. 1. pp. 35–42.
9. Ulitenko K. Ya., Markin R. P. Determination of mill circulating load by process control systems. Obogashchenie Rud. 2005. No. 2. pp. 42–45.
10. Malyarov P. V., Kovalev P. A., Bochkarev A. V., Dolgov A. M. Investigation of mechanisms behind mineral raw materials destruction in ball mills. Obogashchenie Rud. 2018. No. 3. pp. 3–8.
11. Lynch A. J. Mineral crushing and grinding circuits – Their simulation, optimization, design and control. Translated from English. Moscow : Nedra, 1981. 343 p.
12. Kreutz D., Ramos F. M., Rothenberg C. E., Verissimo P. E. et al. Software – Defined Networking: A comprehersive Survey. Proceedings of the IEEE. 2015. Vol. 103, No. 1. pp. 14–76.
13. Vitture S., Zunino C., Sauter T. Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G. Proceedings of the IEEE. 2019. Vol. 107, Iss. 6. pp. 944–961.
14. Sokolov I. V., Shapirovskiy M. R., Kuzyakov A. V. Experience of technological processes optimal control (milling complexes) automated systems creation. Tsvetnye Metally. 2015. No. 9. pp. 53–57.

Language of full-text русский
Полный текст статьи Получить