Journals →  Obogashchenie Rud →  2018 →  #6 →  Back

BENEFICIATION TECHNOLOGY
ArticleName Process flow design for upgrading rough concentrates containing fine slimes of tin and copper minerals
DOI 10.17580/or.2018.06.04
ArticleAuthor Gazaleeva G. I., Nazarenko L. N., Shigaeva V. N.
ArticleAuthorData

JSC «Uralmekhanobr» (Ekaterinburg, Russia):

Gazaleeva G. I., Head of Department, Doctor of Engineering Sciences, gazaleeva_gi@umbr.ru
Nazarenko L. N., Senior Researcher, umbr@umbr.ru
Shigaeva V. N., Junior Researcher, umbr@umbr.ru

Abstract

The article describes the results of research on the development of a concentration technology for upgrading slime concentrates obtained from the tin tailings of the Solnechny GOK. The yield of slime concentrate is 39%, with 44.18% tin recovery and 58.72% copper recovery in the concentrate. Gravity and magnetic separation, flotation and hydroclassification were studied, with the latter and the gravity separation showing negative results. A specific concentration process flow was designed that includes stages of sulphide flotation, wet magnetic separation in a weak field, desliming, high-gradient wet magnetic separation, tin flotation, and table concentration. Copper flotation processes were studied with the use of three types of collectors, such as potassium xanthate, dithiocarbomate and Z-200 (China). The best results in closed experiments were obtained for the Z-200 reagent. The study of the tin flotation process enabled selecting sulfuric, oxalic and salicylichydroxamic (collector) acids, kerosene and high molecular weight alcohol as the suitable reagents. The characteristic features of both copper and tin flotation include product pretreatment in a rotary and oscillatory unit with the addition of a dispersant (hexametaphosphate). Implementation of the process flow proposed enabled obtaining the following commercial products from the rough slime concentrate:
— copper concentrate with the copper mass fraction of 18.23 % and recovery of 34.83% from the source raw material and of 59.32 % from the operation;
— tin concentrate with the tin mass fraction of 11.7 % and recovery of 27.83%. The total tin recovery into the concentrate from the slime and grain-based rough concentrates was 50.88 %, which is almost equal to the values of tin recovery from ore.

keywords Tin-containing tailings, rough slime concentrate, tin flotation, copper recovery, process flow
References

1. Polkin S. I. Flotation of rare metals and tin. Moscow: Gosgortekhizdat, 1960. 637 p.
2. Nedogovorov D. I. Industrial experience in flotation of cassiterite from sludges of complex composition. Byulleten Tsvetnoy Metallurgii. 1958. No. 7. pp. 15–20.
3. Marchenko N. V., Alekseeva T. V. The method of tin tailings beneficiation. Nauchnye Trudy SWorld. 2012. Vol. 10, No. 3. pp. 3–6 .
4. Kotlyarov V. G., Krasnukhina A. V., Fedulkin V. V. Directions for improving the beneficiation schemes for tin-bearing sludge. Byulleten NTS po Obogashcheniyu Rud Tsvetnykh Metallov SEV. 1979. No. 5. pp. 49–56.
5. Preys V. K. Equipment and technology for the beneficiation of alluvial gold sands. Magadan: Kordis, 2002. 300 p.
6. Fedotov P. K., Senchenko A. E., Fedotov K. V., Burdonov A. E. The Kazakhstan deposit tin-bearing ore processing technology. Obogashchenie Rud. 2017. No. 1. pp. 8–14.
7. Yusupov Т. S., Kondratyev S. А., Baksheeva I. I. Production-induced cassiterite-sulfide mineral formation structural-chemical and technological properties. Obogashchenie Rud. 2016. No. 5. pp. 26–30. DOI: 10.17580/or.2016.05.05.
8. Sklyarova G. F., Krupskaya L. T. Concerning rational technologies creation for Solnecny mining and benefication complex wastes processing. Gorny Informatsionno-Analiticheskiy Byulleten. 2013. No. 5. pp. 138–144.
9. Gazaleeva G. I., Nazarenko L. N., Shigaeva V. N., Vlasov I. A. Features of processing of tin-bearing tailings at the Solnechny Mining and Processing Plant. Fiziko-tekhnicheskie Problemy Razrabotki Poleznykh Iskopayemykh. 2018. No. 3. pp. 150–156.
10. Tin statistics and information. URL: https://minerals.usgs.gov/minerals/pubs/commodity/tin/ (accessed: 14.08.2018).
11. Babuk А. V., Galyutin А. Yu., Golikov V. V., Kuskov V. B. Ore preparation processes and dressability studies with regard to the Syrymbet deposit tin-bearing ore. Obogashchenie Rud. 2009. No. 4. pp. 11–14.
12. Pomazov V. D., Laptev S. F., Pustovit V. V. Some features of the beneficiation of tin-sulphide tourmalinebearing ores and fine-tuning of concentrates. Improving the technological schemes of tin beneficiation and metallurgy. Scientific works. Novosibirsk: TsNIIOlovo, 1981. pp. 22–27.
13. Krasnukhina A. V., Kotlyarevskiy I. L., Alferyev I. S. New flotation reagents for non-sulfide minerals. Improving the technological schemes of tin beneficiation and metallurgy. Scientific works. Novosibirsk: TsNIIOlovo, 1981. pp. 38–45.
14. Podkosov L. G., Grekulova L. A., Bannokov V. F., Brodkina E. P., Kazakova R. V., Voevodin Yu. A. The basic principles of constructing schemes for the gravitational beneficiation of tin ores. Research on the intensification of tin and rare metal ores processing. Collection of scientific works. Moscow: VIMS, 1983. pp. 5–15.
15. Grewal I., Lundt M., Wong D., Tse W. Recent developments in preconcentration using dense media separation. URL: https://www.911metallurgist.com/blog/wp-content/uploads/2016/05/Dense-Media-Separation.pdf (accessed: 12.09.2018)
16. Srivastava J. P., Pathak P. N. Pre-concentration: a necessary step for upgrading tungsten ore. International Journal of Mineral Processing. 2000. Vol. 60, No. 1. pp. 1–8.
17. Knapp H., Neubert K., Schropp Ch., Wotruba H. Viable applications of sensor-based sorting for the processing of mineral resources. ChemBioEng Rev. 2014. Vol. 1, No. 3. pp. 86–95.

Language of full-text russian
Full content Buy
Back