Журналы →  Tsvetnye Metally →  2017 →  №1 →  Назад

RARE METALS, SEMICONDUCTORS
Название Scandium concentrate precipitation from carbonate-bicarbonate solutions with calcium hydroxide
DOI 10.17580/tsm.2017.01.08
Автор Kirov S. S., Khayrullina R. T., Suss A. G., Aleksandrov P. V.
Информация об авторе

National University of Science and Technology “MISiS”, Moscow, Russia:
S. S. Kirov, Assistant Professor of a Chair of Non-Ferrous Metals and Gold, e-mail: kirovss@list.ru
R. T. Khayrullina, Assistant Professor of a Chair of Non-Ferrous Metals and Gold
P. V. Aleksandrov, Assistant Professor of a Chair of Non-Ferrous Metals and Gold

 

LLC “Engineering-Technological Center “RUSAL”, Saint Petersburg, Russia:

A. G. Suss, Director of Technological Department of Engineering-Technological Direction of Alumina Industry

Реферат

This paper shows the results of scandium separation from an extremely low concentrated solution generated in carbonate-bicarbonate leaching of red muds from Ural Aluminum Plant. Calcium hydroxide was found as an effective precipitation agent. The study covers the influence of calcium hydroxide in form of lime milk on the pH level of scandium-containing solution with chemical composition, g/dm3: 51.88 total Na2O (where 37.33 is bicarbonate of Na2O, 14.55 is carbonate of Na2O), 0.0077 Sc2O3, 0.29 ZrO2, 0.31 TiO2. Even a small exceed of CaO allows separating of 90% scandium in solid phase while keeping 95% of zirconium in solution. We investigated the effect of temperature and duration of precipitation process on behavior of scandium and co-following zirconium and titanium (as well as chemical and physical compositions of precipitations). Tiff is a basic phase that contains Sc2O3 up to 0.3% (wt.). The work demonstrates that limewater effectively precipitates scandium oxide, and separates the high concentrated bicarbonate bypass solutions. This allows keeping down the costs on pulp aeration of carbonate-bicarbonate leaching. Based on the larger-scale testing data, technological parameters for scandium separation using limewater are recommended. Scandium can be extracted from Ca – Sc residues by sulfuric acid. Dynamics of behavior of pulp pH level and temperature influence on separation rate of scandium, titanium, and zirconium into solution is studied. Acidic liquors after sulfuric treatment have the following chemical composition, g/dm3: 0.878 CaO, 0.055 TiO2, 0.033 Sc2O3, 0.004 Al2O, 0.002 ZrO2. Reagents consumption factors are derived for lime and concentrated sulfuric acid. The study shows that proposed method enables higher throughout recovery of Sc2O3 from carbonate-bicarbonate solutions up to 82%.

This article was written within the fulfillment of the subsidiary agreement No. 14.578.21.0014 (5 June 2014) (unique identifier: RFMEFI57814X0014) between the National University of Science and Technology “MISiS” and the Ministry of Education and Science of Russian Federation, within the realization of the Federal Target Program “Investigations and Developments on the priority ways of development of scientific-technological complex of Russia for 2014–2020 years”, approved by the decision of the Government of the Russian Federation (28 November 2013) No. 1096.

Ключевые слова Red mud, scandium oxide, carbonate-bicarbonate solution, sulfuric acid treatment, scandium hydroxide, hydrolysis, lime hydrate, Ca–Sc residue, purification of scandium containing solution
Библиографический список

1. Pyagay I. N., Yatsenko S. P., Skachkov V. M. Exerimental-industrial production for extraction of scandium from alumina industry slime. Tsvetnye metally. 2011. No. 12. pp. 75–79.
2. Borra С. R., Mermans J., Blanpain B., Pontikes Y., Binnemans K., Van Gerven T. Selective leaching of rare earths from bauxite residue after sulphation roasting. Bauxite residue valorisation and best practices. Leuven, 5–7 October 2015. pp. 301–307.
3. Borra C. R., Pontikes Y., Binnemans K., Van Gerven T. Leaching of rare earths from bauxite residue (red mud). Minerals Engineering. 2015. Vol. 76. pp. 20–27.
4. Medvedev A. S., Khayrullina R. T., Kirov S. S., Suss A. G. Technical scandium oxide obtaining from red mud of Urals Aluminium Smelter. Tsvetnye metally. 2015. No. 12. pp. 47–52.
5. Pyagay I. N., Yatsenko S. P., Pasechnik L. A., Ibragimov T. S., Kim V. A., Skryabneva L. M. Method of obtaining of scandium oxide from red mud. Patent RF, No. 2483131. Applied: 26.12.2011. Published: 27.05.2013. Bulletin No. 15.
6. Van Roosendael S. Selective adsorption of scandium with functionalized chitosan-silica hybrid materials in the context of the valorization of bauxite residue : thesis for the degree of master of science in chemistry. Leuven : KU Leuven, 2015. 64 р.
7. Pasechnik L. A., Shirokova A. G., Koryakova O. V., Sabirzyanov N. A., Yatsenko S. P. Complexing Properties of Scandium (III) in Alkaline Medium. Zhurnal prikladnoy khimii. 2004. Vol. 77, No. 7. pp. 1086–1089.
8. Medvedev A. S., Kirov S. S., Khayrullina R. T., Suss A. G. Carbonization leaching of scandium from red mud with preliminary pulp gassing by carbonic acid. Tsvetnye metally. 2016. No. 6. pp. 67–73. DOI: 10.17580/tsm.2016.06.09
9. Yatsenko S. P., Pasechnik L. A., Pyagay I. N., Sabirzyanov N. A. Concentration and purification of scandium during the extraction from red mud. VI International congress “Non-ferrous metals and minerals – 2014”. Krasnoyarsk, 2014. pp. 339–344.
10. Brown P. L., Ekberg C. Hydrolysis of Metal Ions. Weinheim : Wiley-VCH, 2016.
11. Favorskaya L. V. Chemical technology of scandium. Alma-Ata, 1969. 142 p.
12. Urusov V. S. Theoretical crystal-chemistry. Moscow : Publishing House of Moscow State University, 1987. 275 p.
13. Betekhtin A. G. Mineralogy course. Moscow, 2007. 721 p.
14. Komissarova L. N. Inorganic and analytical chemistry of scandium. Moscow : Editorial URSS, 2001. 512 p.
15. Korshunov B. G., Reznik A. M., Semenov S. A. Scandium. Moscow : Metallurgiya, 1987. 184 p.

Language of full-text русский
Полный текст статьи Получить
Назад