Journals →  Gornyi Zhurnal →  2016 →  #4 →  Back

EQUIPMENT AND MATERIALS
ArticleName Concept of automated control for potash flotation plant
DOI 10.17580/gzh.2016.04.17
ArticleAuthor Matveev V. A.
ArticleAuthorData

VNII Galurgy Stock Co., St. Petersburg, Russia:

V. A. Matveev, Divisional Manager, Candidate of Engineering Sciences, matveev@galurgy.sp.ru

Abstract

The paper gives analysis of a trend in development of systems for production facilities control. It has been shown that present-day approach to the strategy of control is a comprehensive one enabling to carry out the functions of control with regard to business-processes, resources, financial and material flows, as well as to control product manufacturing processes. The concept of control for potash flotation plant is being considered at the junction of MES-system and Automated Systems for Control of Production Processes (ASUTP) and is devoted to operative management of processing in the form of operative planning of the manufactured product volume given technological possibilities and distribution of load by process sections (areas). Process technology capabilities of a plant have been stipulated by the following principal factors: standard (rated) load on the equipment (optimum operation mode), rated (regulatory) coefficient for admissible fluctuations in the equipment operation — Kn, as well as coefficient of variation for KCl mass fraction in the ore — Kv. Design (calculation) framework limitations have been set for changes in the planned volume of a product output, according to the interrelationship of Kn and Kv coefficients (4 possible options). It has been shown that control by the criterion of stabilizing the ore load is more preferable compared with automatic load control (regulation) by the parameter of KCl mass fraction in the ore. The conditions for optimum distribution of loads by sections have been determined. It has been suggested to use simulation modeling, as an addition to the design calculation method, in order to solve the problem.

keywords Potash flotation plant, automatic control, processing, production volume, load dispatch, weight content of KCl
References

1. Golovkov B. Yu., Kolpikov G. G., Reybman l. A. Avtomatizatsiya kaliynykh obogatitelnykh fabrik (Automation of potassium concentration plants). Moscow : Nedra, 1983. 200 p.
2. Vishnyak B. A., Pozdeev A. A., Turko M. R. Tekhnologiya obogashcheniya i avtomatizatsiya protsessov kaliynykh flotatsionnykh fabrik (Concentration technology and process automation at potassium flotation plants). Perm : Perm National Research Polytechnic University, 2011. 239 p.
3. Bekker V. F. Reshenie tekhnologicheskikh problem deystvuyushchego proizvodstva sredstvami avtomatizatsii. Tom 1. Proizvodstvo kaliynykh udobreniy (Technological problem solving for operating production facilities by means of automation. Volume 1. Manufacturing of potassium fertilizers). Perm : Berezniki branch of Perm National Research Polytechnic University, 2012. 238 p.
4. Vishnyak B. A., Pozdeev A. A. O tekhnologii obogashcheniya i avtomatizatsii protsessov sovremennykh kaliynykh flotatsionnykh fabrik (Concentration technology and process automation at modern potassium flotation plants). Gornyy Informatsionno-Analiticheskiy Byulleten = Mining Informational and Analytical Bulletin. 2012. No. 9. pp. 138–150.
5. Data science and big data analytics: discovering, аnalizing, visualizing and presenting data. Indianapolis, Indiana : John Wiley & Sons, Inc., 2015. 432 p.
6. Rasmuson A., Andersson B., Andersson R., Ollson L. Mathematical Modeling in Chemical Engineering. University Printing House, published in the United States of America by Cambridge University Press, New York, 2014. 183 p.
7. Morozov V. V., Topchaev V. P., Ulitenko K. Ya. et al. Razrabotka i primenenie avtomatizirovannykh sistem upravleniya protsessami obogashcheniya poleznykh iskopaemykh (Development and use of automated control systems for mineral concentration processes). Moscow : “Ore and Metals” Publishing House, 2013. 507 p.
8. Kohonen T. Samoorganizuyushchiesya karty: adaptivnye i intellektualnye sistemy (Self-organizing maps: adaptive and intellectual systems). Moscow : BINOM. Laboratoriya znaniy, 2010. 655 p.
9. Vielsietiges Motion Control-System in einem Industrie-PC. AT Mineral Processing. 2015. No. 6. pp. 52–53.
10. Edwards R., Wien A. Strategiya primeneniya kontrolno-izmeritelnykh priborov i avtomatiki v tsiklakh izmelcheniya (Strategy for the use of metering apparatuses and automation in grinding circuits). Mineral Processing Plant Design, Practice and Control : materialy simpoziuma (Mineral Processing Plant Design, Practice and Control : Symposium materials). Canada, Vancouver, October 20–24, 2002.
11. Laurilla H., Karesvuory Y., Tinly O. Strategiya primeneniya kontrolno-izmeritelnykh priborov, avtomatiki i upravleniya v tsiklakh flotatsii (Strategy for the use of metering apparatuses, automation and control in flotation circuits). Mineral Processing Plant Design, Practice and Control) : materialy simpoziuma (Mineral Processing Plant Design, Practice and Control : Symposium materials). Canada, Vancouver, October 20–24, 2002.
12. Shonbruni F., Halles L., Bedell D. Strategiya primeneniya kontrolno-izmeritelnykh priborov, avtomatiki i upravleniya v tsiklakh sgushcheniya i filtratsii (Strategy for the use of metering apparatuses, automation and control in thickening and filtration circuits). Mineral Processing Plant Design, Practice and Control : materialy simpoziuma (Mineral Processing Plant Design, Practice and Control : Symposium materials). Canada, Vancouver, October 20–24, 2002.
13. Matveev V. A., Arkhipov N. V., Masloboeva L. I., Papchenko A. Yu. Problemy avtomatizatsii flotatsionnykh fabrik (Problems in automation of flotation plants). Aktualnye voprosy dobychi i pererabotki prirodnykh soley (Topical issues in mining and processing of natural salts). Saint Petersburg : LIK, 2001. Vol. 2. pp. 85–95.
14. Shcherbakov D. S. Kontseptsiya upravleniya naukoemkim proizvodstvom v innovatsionnom biznese (Control concept for science-intensive manufacturing in the innovation business). Saratov : TsPM, 2011. 165 p.
15. Mazur I. I., Shapiro V. D., Olderugge N. G. Effektivnyy menedzhment (Effective management). Moscow : Vysshaya shkola, 2003. 555 p.
16. Cohen O., Fedurco E. Fundamentals of the theory of constraints. Tallin : TOC Strategic Solutions, 2012. 331 p.
17. Nesterova A., Samoylova T. MES-sistemy na Rossiyskom promyshlennom rynke: ot istokov k budushchemu (MES-systems in the Russian industrial market: from the origins to the future). Ratsionalnoe upravlenie predpriyatiem = Rational Enterprise Management. 2009. No. 6. pp. 77–79.
18. Promyshlennye kontrollery i integratsiya ERP/APS+MES+ASUTP (po materialam kompanii BCC) (Industrial controllers and integration ERP/APS+MES+PCS (BCC company materials)). Ratsionalnoe upravlenie predpriyatiem = Rational Enterprise Management. 2009. No. 2. pp. 50–51. (in Russian)
19. Zherebtsov A., Beloshapko A. Imitatsionnoe modelirovanie kak instrument optimizatsii proizvodstvennykh protsessov v metallurgii (Simulation modeling as a tool for production processes optimization in metallurgy). Ratsionalnoe upravlenie predpriyatiem = Rational Enterprise Management. 2009. No. 6. pp. 29–31.

Full content Concept of automated control for potash flotation plant
Back