CIS Iron and Steel Review
| Sintering | |
| ArticleName | Study of the effect of technological parameters and iron ore part composition on sintering process and desulphurization degree |
| ArticleAuthors | M. I. Dli, V. I. Bobkov, A. A. Bykov, N. S. Kulyasov |
| ArticleAuthorsData | Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia) M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, midli@mail.ru
Financial University under the Government of the Russian Federation (Moscow, Russia) |
| ArticleName | Influence of quality and method for lime introduction in sintering charge on the results of a sintering process |
| ArticleAuthors | A. N. Shapovalov, S. P. Nefedyev, R. R. Dema, O. R. Latypov, R. N. Amirov |
| ArticleAuthorsData | National University of Science and Technology “MISIS”, Novotroitsk Affiliate (Novotroitsk, Russia) A. N. Shapovalov, Cand. Eng., Associate Prof., alshapo@misis.ru
National University of Science and Technology “MISIS”, Novotroitsk Affiliate (Novotroitsk, Russia)1 ; Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)2
National University of Science and Technology “MISIS”, Novotroitsk Affiliate (Novotroitsk, Russia)1 ; Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)2 ; Kherson Technical University (Genichesk, Russia)3 R. R. Dema, Dr. Eng., Associate Prof.1, 2, 3, demarr78@mail.ru
National University of Science and Technology “MISIS” (Moscow, Russia)
Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) |
| Steel Making | |
| ArticleName | Efficiency of the improved algorithm for controlling electrical and process modes of the modular-type electric arc furnace |
| ArticleAuthors | A. A. Nikolaev, P. G. Tulupov, M. V. Bulanov, P. I. Svyatkin |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) A. A. Nikolaev, Cand. Eng., Head of the Dept. of Automatic Electric Drive and Mechatronics, aa.nikolaev@magtu.ru |
| Rolling | |
| ArticleName | Evaluation of the convexity of the transverse profile of rolled steel strip |
| ArticleAuthor | D. L. Shalaevsky |
| ArticleAuthorData | Cherepovets State University (Cherepovets, Russia) D. L. Shalaevsky, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, shal-dmitrij@yandex.ru |
| ArticleName | Imitating model of the rollingdrawing process for short sheets |
| ArticleAuthors | A. V. Vydrin, V. S. Gorbunova, A. P. Pellenen, A. M. Pesin |
| ArticleAuthorsData | South Ural State University (Chelyabinsk, Russia) A. V. Vydrin, Dr. Eng., Prof., Head of the Dept. of Processes and Machines for Metal Forming, vydrinav@susu.ru
Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) A. M. Pesin, Dr. Eng., Prof., Dept. of Materials Processing Technologies, a.pesin@magtu.ru |
| Metal Forming | |
| ArticleName | Calculation of kinematic characteristics of metal forming processes in lagrangian coordinates |
| ArticleAuthors | A. S. Budnikov, G. P. Zhigulev, V. A. Fadeev, T. Y. Sidorova |
| ArticleAuthorsData | National University of Science and Technology “MISIS” (Moscow, Russia) A. S. Budnikov, Cand. Eng., Associate Prof., Dept. of Metal Forming |
| Rail Production and Quality Control | |
| ArticleName | Repair of damaged 76KhF steel rails using laser powder cladding |
| ArticleAuthors | A. B. Lyukhter, A. V. Zavitkov, A. G. Akopian, A. I. Nikolin, N. A. Markov |
| ArticleAuthorsData | Vladimir State University named after Alexander and Nikolay Stoletovs (VlSU) (Vladimir, Russia) A. B. Lyukhter, Cand. Eng., Associate Prof., Director of the Scientific and Educational Center for the Introduction of Laser Technologies, 3699137@mail.ru
Vladimir State University named after Alexander and Nikolay Stoletovs (VlSU) (Vladimir, Russia)1 ; Vladimir Engineering Center for the Application of Laser Technologies in Mechanical Engineering at VlSU (Vladimir, Russia)2 N. A. Markov, Assistant of the Dept. of Heat and Gas Supply, Ventilation and Hydraulics, Engineer of the Experimental Production of the Scientific and Educational Center for the Introduction of Laser Technologies1, 2, mnikita.markovm@gmail.com
Russian Railways (OJSC RZhD), Department of Technical Policy (Moscow, Russia) A. G. Akopian, Deputy Head of the Technical Policy Dept., akopian-rzd@yandex.ru
Railway Research Institute of JSC Russian Railways (VNIIZhT) (Moscow, Russia) A. I. Nikolin, Cand. Eng., Director of the Scientific Certification Center “Welding” of the Scientific Center “Infrastructure”, nikolin.arkady@vniizht.ru |
| Tubemaking | |
| ArticleName | Identifying the causes of metallurgical defects in tube blanks made from 32G2 steel |
| ArticleAuthors | A. T. Mammadov, S. N. Namazov, M. Ch. Huseynov, A. A. Jafarova, S. M. Rustamova, G. A. Mirzayeva |
| ArticleAuthorsData | Azerbaijan Technical University (Baku, Azerbaijan) A. T. Mammadov, Dr. Eng., Prof., Advisor of the Dept. “Metallurgy and Materials Technology”, ariff-1947@mail.ru |
| Metal Science and Metal Physics | |
| ArticleName | Selection of the optimal parameters of controlled rolling and accelerated cooling of rolled products made of steel with ST80 strength class, which is aimed on manufacturing coiled tubing for Arctic application |
| ArticleAuthors | A. S. Kuznetsova, P. P. Poletskov, N. V. Koptseva, Yu. Yu. Efimova, D. Yu. Alekseev, A. E. Gulin |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia) A. S. Kuznetsova, Cand. Eng., Associate Prof., Engineering Center, allakuznetsova.mgtu@mail.ru |
| ArticleName | Study of forming of gradient structure and properties for low-carbon steel in drawing operation with wall thinning |
| ArticleAuthors | A. I. Olekhver, E. Yu. Remshev, P. M. Vinnik, G. A. Vorobyeva, Z. N. Rasulov |
| ArticleAuthorsData | Baltic State Technical University “VOENMEKH” named after D. F. Ustinov (St. Petersburg, Russia) A. I. Olekhver, Cand. Eng., Associate Prof., E4 “High-Energy Devices of Automatic Systems” Dept., leshicher@mail.ru |
| Metal Physics | |
| ArticleName | Analytical dependence of relative elongations on normal stresses at elastic-plastic stretching of bimetallic beam with transverse connection of metals |
| ArticleAuthor | V. N. Shinkin |
| ArticleAuthorData | National University of Science and Technology “MISiS” (Moscow, Russia) V. N. Shinkin, Dr. Phys.-Math., Professor, shinkin-korolev@yandex.ru |
| Welding Technologies | |
| ArticleName | Investigation of thermal cycles in multi-pass welding of low-alloy steel under subzero ambient temperature conditions |
| ArticleAuthors | N. I. Golikov, I. I. Sannikov, S. V. Semyonov, P. S. Dmitriev |
| ArticleAuthorsData | Institute of Physical-Technical Problems of the North named after V. P. Larionov, Siberian Branch of the Russian Academy of Sciences (Yakutsk, Russia) N. I. Golikov, Dr. Eng., Chief Researcher, Dept. 10. Welding and Metallurgy Technologies, n.i.golikov@mail.ru |
| Coating Application and Corrosion Protection | |
| ArticleName | Effect of InSn additives on the structure and tribological characteristics of TiAlZrN nanocomposite coatings on AISI 304 steel |
| ArticleAuthors | A. A. Lozovan, S. V. Savushikna, S. Ya. Betsofen, I. A. Nikolaev |
| ArticleAuthorsData | Moscow Aviation Institute (National Research University) (Moscow, Russia) A. A. Lozovan, Dr. Eng., Prof. |
| ArticleName | Application of protective coatings on steel working bodies of soil-tilling implements |
| ArticleAuthors | A. E. Litvinov, L. S. Khakhulin |
| ArticleAuthorsData | Kuban State Technical University (Krasnodar, Russia) A. E. Litvinov, Dr. Eng., Associate Prof., Prof., Head of the Dept. of Technical Mechanics and Special Machines named after Prof. A. A. Petrik, artstyleone@mail.ru |
| ArticleName | Reducing the hydrogen permeability of steel pipelines by applying internal composite polymer coatings |
| ArticleAuthors | A. P. Petkova, V. A. Zlotin, Ya. E. Gekht, V. S. Borisova, G. Yu. Kalinin |
| ArticleAuthorsData | Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia) A. P. Petkova, Dr. Eng., Prof., Dept. of Materials Science and Technology of Art Products, apetkova@inbox.ru
ITMO University (St. Petersburg, Russia)
National Research Center "Kurchatov Institute" - Central Research Institute of Structural Materials "Prometey" (St. Petersburg, Russia) G. Yu. Kalinin, Dr. Eng., Associate Prof. |
| Powder Metallurgy | |
| ArticleName | Models for calculating residual porosity and stresses in powdered iron produced in a rigid matrix |
| ArticleAuthors | A. T. Mammadov, S. N. Namazov, A. I. Babayev, A. A. Jafarova, S. M. Rustamova, A. M. Yariyeva |
| ArticleAuthorsData | Azerbaijan Technical University (Baku, Azerbaijan) A. T. Mammadov, Dr. Eng., Prof., Advisor of the Dept. “Metallurgy and Materials Technology”, ariff-1947@mail.ru |
| Machine-building Technologies | |
| ArticleName | Comparative study of tool life of solid and multi coated ceramic hard alloy tools in turning of high-chromium white cast iron castings |
| ArticleAuthors | B. Purevdorj, D. Battsengel |
| ArticleAuthorsData | Erdenet Institute of Technology, Mongolian University of Science and Technology (Erdenet City, Mongolia) B. Purevdorj, purevdorj@erdenetis.edu.mn |
| ArticleName | Features of calculation of couplings with dowels in manufacture of jointed parts made of steel and cast iron |
| ArticleAuthors | O. A. Leonov, N. Zh. Shkaruba, Yu. G. Vergazova |
| ArticleAuthorsData | Russian State Agrarian University – Moscow Timiryazev Agricultural Academy (Moscow, Russia) O. A. Leonov, Dr. Eng., Prof., oaleonov@rgau-msha.ru |
| Economics and Social Partnership | |
| ArticleName | Methodological support for the formation of socio-cultural projects in the area of responsibility of ferrous metallurgy companies |
| ArticleAuthors | I. Yu. Novoselova, A. V. Sharkova, O. N. Vasilyeva |
| ArticleAuthorsData | Financial University under the Government of Russian Federation (Moscow, Russia) I. Yu. Novoselova, Dr. Econ., Prof., Dept. of Industrial Markets, iunov2010@yandex.ru |
