Chernye Metally

Hot Sheet Rolling
Название	Numerical simulation of variable lateral reduction of strip in the roughing group of wide-strip hot rolling mill
Авторы	N. L. Bolobanova, R. L. Shatalov, M. A. Bolobanov
Информация об авторах	Cherepovets State University, Cherepovets, Russia N. L. Bolobanova, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: nlbolobanova@chsu.ru Moscow Polytechnic University, Moscow, Russia R. L. Shatalov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: mmomd@mail.ru Moscow Polytechnic University, Moscow, Russia¹ ; Severstal-Project Ltd., Cherepovets, Russia² M. A. Bolobanov, Postgraduate Student, Dept. of Materials Forming and Additive Technologies¹, First Category Specialist², e-mail: ma.bolobanov@severstal.com
Название	Reducing the unevenness of strip width elongation distribution during hot rolling due to transverse metal displacement in the deformation zone
Автор	S. M. Belsky
Информация об авторе	Lipetsk State Technical University, Lipetsk, Russia S. M. Belsky, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: belsky-55@yandex.ru
Название	Designing of technological processes for production of hot-rolled steel products as a semi-finished material
Авторы	E. M. Golubchik, M. A. Polyakova, A. V. Markevich
Информация об авторах	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia E. M. Golubchik, Dr. Eng., Prof., M. I. Boyarshinov Dept. of Materials Forming, Associate Prof., e-mail: e.golubchik@magtu.ru M. A. Polyakova, Dr. Eng., Prof., M. I. Boyarshinov Dept. of Materials Forming, Associate Prof., e-mail: m.polyakova@magtu.ru A. V. Markevich, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: artemiy.markevich@bk.ru
Название	Assessment of the position and dimension of no slip zone during longitudinal hot rolling of strip based on computer simulation
Авторы	M. M. Skripalenko, B. A. Romantsev, M. N. Skripalenko, I. S. Alimov, A. V. Danilin
Информация об авторах	University of Science and Technology MISIS, Moscow, Russia¹ ; IMET RAS, Moscow, Russia² M. M. Skripalenko, Cand. Eng., Associate Prof.¹, Senior Researcher², e-mail: mms@misis.ru University of Science and Technology MISIS, Moscow, Russia¹ ; IMET RAS, Moscow, Russia² B. A. Romantsev, Dr. Eng., Prof.¹, Senior Researcher², e-mail: boralr@yandex.ru University of Science and Technology MISIS, Moscow, Russia M. N. Skripalenko, Cand. Eng., Associate Prof., Research Project Expert, e-mail: tfsmn@yandex.ru A. V. Danilin, Senior Lecturer, e-mail: danilinav@misis.ru LLC "QuantorForm", Moscow, Russia I. S. Alimov, Technical Support Engineer, e-mail: igor.alimov@qform3d.ru
Название	Simulation of the cooling process of clad rolled products in a pile
Авторы	A. G. Zinyagin, A. V. Muntin, A. P. Stepanov, M. O. Kryuchkova, N. R. Borisenko
Информация об авторах	Bauman Moscow State Technical University, Moscow, Russia A. G. Zinyagin, Cand. Eng., Associate Prof., e-mail: ziniagin_ag@bmstu.ru A. V. Muntin, Cand. Eng., Associate Prof., e-mail: muntin_av@bmstu.ru A. P. Stepanov, Postgraduate Student, e-mail: Stepanov_ap@bmstu.ru M. O. Kryuchkova, Senior Lecturer, e-mail: mariya.mironova@bmstu.ru N. R. Borisenko, Postgraduate Student, e-mail: BorisenkoNikita17@yandex.ru
Cold Sheet Rolling
Название	Theoretical study of the effect of work roll barrel profiling in a cold rolling mill’s continuous stands on the flatness of finished steel strips
Автор	D. L. Shalaevsky
Информация об авторе	Cherepovets State University, Cherepovets, Russia D. L. Shalaevsky, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: shal-dmitrij@yandex.ru
Название	Method for presetting CVC and WRB parameters of a multi-stand tandem cold rolling mill to ensure IF steel strip flatness
Авторы	I. A. Kharlamov, N. L. Bolobanova
Информация об авторах	Severstal, Cherepovets, Russia¹ ; Cherepovets State University, Cherepovets, Russia² I. A. Kharlamov, Head of the Quality Management Department, Directorate for Technical Development and Quality¹, Master’s student, Advanced Engineering School², e-mail: ia.kharlamov@severstal.com Severstal, Cherepovets, Russia N. L. Bolobanova, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy, Mechanical Engineering, and Technological Equipment, e-mail: nlbolobanova@chsu.ru
Название	Integrated approach to produce cold-rolled sheet steel with efficient surface roughness
Авторы	M. I. Rumyantsev, A. N. Zavalishchin
Информация об авторах	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia M. I. Rumyantsev, Dr. Eng., Prof., M. I. Boyarshinov Dept. of Materials Forming, e-mail: mir@magtu.ru A. N. Zavalishchin, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science, e-mail: zaval1313@mail.ru
Название	Determination of the heterogeneity of cold-rolled strip properties by thermo-EMF. Message 1. Development of a research methodology
Авторы	M. V. Chukin, Yu. Yu. Efimova, N. V. Koptseva
Информация об авторах	Nosov Magnitogorsk State University, Magnitogorsk, Russia M. V. Chukin, Dr. Eng., Prof., Chief Researcher, Nanosteel Research Institute, e-mail: m.chukin@mail.ru Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science N. V. Koptseva, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science
Section Rolling and Drawing
Название	Structural model of the problem of optimizing process for section rolling. Message 1. Deformation zone geometry
Авторы	A. M. Mikhaylenko, D. L. Shvarts
Информация об авторах	Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia A. M. Mikhaylenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: am_plus@mail.ru D. L. Shvarts, Dr. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: d.l.shvartc@urfu.ru
Название	Modeling structure formation in TRIP steel during multiple wire drawing
Авторы	A. G. Korchunov, D. V. Konstantinov, E. M. Ogneva
Информация об авторах	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia A. G. Korchunov, Dr. Eng., Prof., Head of the Dept. of Design and Operation of Metallurgical Machines and Equipment D. V. Konstantinov, Cand. Eng., Research Sector Employee, Head of the Youth Laboratory “Laboratory of Engineering of Advanced Hardware Technologies”, e-mail: const_dimon@mail.ru E. M. Ogneva, Cand. Eng., Senior Lecturer, Dept. of Design and Operation of Metallurgical Machines and Equipment
Название	Evaluation of joint strength and uniformity of clad layer thickness of bimetallic wire rod
Авторы	V. F. Danenko, L. M. Gurevich
Информация об авторах	Volgograd State Technical University, Volgograd, Russia V. F. Danenko, Cand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: omd@vstu.ru L. M. Gurevich, Dr. Eng., Associate Prof., Head of the Dept. of Materials Science and Composite Materials
Pipe Rolling
Название	Optimization of groove shape in plugless rolling
Авторы	I. K. Farukshin, A. V. Vydrin, D. A. Akhmerov, B. A. Chaplygin
Информация об авторах	TMK Research Center, Moscow, Russia I. K. Farukshin, Junior Researcher, Laboratory of Modeling of Technological Processes, e-mail: ilya.farukshin@tmk-group.com D. A. Akhmerov, Deputy Head of the Laboratory of Modeling of Technological Processes, e-mail: akhmerovda@tmk-group.com South Ural State University (National Research University), Chelyabinsk, Russia A. V. Vydrin, Dr. Eng., Prof., Head of the Dept. of Processes and Machines for Metal Forming, e-mail: vydrinav@susu.ru B. A. Chaplygin, Dr. Eng., Prof., Dept. of Processes and Machines for Metal Forming, e-mail: chaplyginba@susu.ru

Журналы → Chernye Metally → 2026 → №2

Журналы

CIS Iron and Steel Review

Горный мир музеев