Журналы →  Chernye Metally →  2021 →  №7

Chernye Metally


The issue is dedicated to the 60th anniversary of the Chernye Metally journal and consists of articles written by members of its editorial board.


The issue begins with an article on the history and prospects of development of the «Chernye Metally» journal, also provides information on the editorial board membership and areas of cooperation of the journal with enterprises, universities, research and design organizations.


The "Experience of cooperation with partners - universities, research centers and metallurgical forums" section presents articles on cooperation of Nosov MSTU and JSC "RosNITI" with the « Chernye Metally» journal, as well as reports presented at the first international conference «Clean steel: from ore to rolled metal – 2020».


In the «Training and personnel policy» section an article was published by the journal`s editor-in-chief, devoted to raising the prestige of professions of miner and metallurgist, prospects for development of the mining and metallurgical industry and the introduction of new technologies.


The «Metallurgy» section presents articles on promising areas of development of cast iron, application of modeling methods to assess the quality of welded pipes and increase the efficiency of sheet metal production with a thickness of 60 to 100 mm with thermochemical treatment, including accelerated cooling.


The «Metal Science» section is devoted to methods of express identification of metals and alloys in industrial water, the use of laser welding for new austenitic cryogenic corrosion-resistant steels, as well as the assessment of microstructural heterogeneity of sheet metal.


The «Ecology and recycling» section, which is devoted to up-ti-day methods of cleaning toxic emissions from ferrous metallurgy enterprises, finishes the issue.

Please find more details below, or order your printed or electronic version of the Journal.

Mineral Processing
Название Issues of vocational and engineering education for development of the mining and metallurgical industry in post-industrial Russia (Part 1)
Авторы V. M. Kolokoltsev, E. Yu. Meshcheryakov
Информация об авторах

Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. M. Kolokoltsev, Dr. Eng., Prof., President, e-mail: kwm@magtu.ru
E. Yu. Meshcheryakov, Cand. Eng., Associate Prof., Head of the Strategic Planning Department, e-mail: ntc@magtu.ru

Название Current trends in cast iron production
Авторы I. O. Leushin, A. G. Panov
Информация об авторах

Nizhny Novgorod State Technical University (Nizhny Novgorod Russia):

I. O. Leushin, Dr. Eng., Prof., Head of Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru


Naberezhnye Chelny Institute of Kazan Federal University (Naberezhnye Chelny, Russia):
A. G. Panov, Dr. Eng., Associate Prof., Dept. of Materials, Technologies and Quality, e-mail: panov.ag@mail.ru

Название Experimental and mathematical methods for calculation of residual stresses in production of welded pipes
Авторы A.P. Kolikov, S. O. Ti, T. Yu. Sidorova
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):
A. P. Kolikov, Dr. Eng., Prof., Metal Forming Dept., e-mail: apkolikov@mail.ru
S. O. Ti, Undedrgraduate, Metal Forming Dept.
T. Yu. Sidorova, Senior Lecturer, Metal Forming Dept.

Название Production of structural steel heavy plates up to 100 mm by TMCP with final accelerated cooling for wind generators and bridgebuilding. Part 2
Автор E. A. Goli-Oglu
Информация об авторе

NLMK Dansteel A/S (Frederikswerk, Denmark):

E. A. Goli-Oglu, Cand. Eng., Technology&Product Development Manager, e-mail: Egoli-Oglu@yandex.ru

Metal Science and Metallography
Название Laser welding of new austenitic cryogenic corrosion-resistant steels alloyed with nitrogen
Авторы L. M. Kaputkina, D. E. Kaputkin, I. V. Smarygina, V. E. Kindop
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia)
L. M. Kaputkina, Dr. Phys.-Math., Prof., Chief Researcher, Metal Forming Dept., e-mail: kaputkina@mail.ru
D. E. Kaputkin, Dr. Eng., Associate Prof., Dept. of Physics;
I. V. Smarygina, Cand. Eng., Associate Prof., Metal Forming Dept.


Moscow State Technical University of Civil Aviation (Moscow, Russia):
V. E. Kindop, Cand. Eng., Senior Researcher, Deputy Head of Science Directorate

Название Methodological features of microstructural heterogeneity estimation by the thickness of steel plates
Авторы A. A. Kazakov, D. V. Kiselev, E. I. Kazakova
Информация об авторах

Thixomet Ltd. (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., Head of the Metallurgical Expertise Laboratory, e-mail: kazakov@thixomet.ru
D. V. Kiselev, Technical Director
E. I. Kazakova, Leading Engineer


O. V. Pakhomova participated in this research.

Название Methods for rapid identifi cation of metals, alloys and impurity composition of industrial water in production conditions
Авторы O. I. Boriskin, G. F. Nuzhdin, I. V. Muravyeva
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia) Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Director of Polytechnic Institute


National University of Science and Technology “MISiS” (Moscow, Russia)

G. A. Nuzhdin, Cand. Eng., Associate Prof., e-mail: nuzhdin.65@mail.ru
I. V. Muravyeva, Cand. Eng., Associate Prof.

Ecology and Recycling
Название Modern methods for purification of emissions from ferrous metallurgy enterprises
Авторы I. V. Butorina, M. V. Butorina
Информация об авторах

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru


Baltic State Technical University “Voenmekh” (St. Petersburg, Russia):

M. V. Butorina, Cand. Eng., Associate Prof.

Журналы →  Chernye Metally →  2021 →  №7