Journals →  Chernye Metally →  2019 →  #1

Chernye Metally


The first issue of the "Chernye Metally" journal is opened by the "Preparing raw materials" section. The authors consider the possibility of using in the blast-furnace process biomass and waste plastics, self-regenerating granules and ore-coal composites, coke nut, granular and pre-treated coal, briquetted charge for the Corex process and other products.


In the second article of the section, the authors of the National Polytechnic University of Armenia propose, when obtaining molybdenum oxide, to replace the firing of molybdenum sulfide by its mechanical activation.


In the “Foundry production” section, Professor I. E. Illarionov and co-authors presented studies of the coating and penetrating layers depending on the content of mechanically activated graphite in the filler of the coating applied to cold hardening mixtures based on liquid glass and resins.


In the section “Rolling and other metal deformation processes”, a comprehensive method for calculating the deformation and energy-power indicators and parameters of the combined technological process of rotational drawing and cross-rolling of a wheel disk from a sheet blank has been proposed. The section also presents studies of drawing low rectangular boxes from various variants of shaped blanks.


The authors of the section “Energy and Ecology” presented an analysis of prospects for transition to new methods of environmental protection regulation by introducing the best available technologies (BAT) in enterprises of iron and steel industry of the Russian Federation and gave an assessment of the materials presented in the “BAT Handbook. Iron, Steel and Ferroalloy Production” developed by the BAT Bureau. It has been shown that the handbook needs some follow-up revision. Also in the section, the solution to the issue of storing red mud by involving it in complex processing with the extraction of most useful components has been proposed.


In the section “Metallurgy and metallography”, the authors presented studies of static and dynamic magnetic properties and plasticity of amorphous cobalt alloy ribbons in order to improve their properties and ensure competitive use based on modern management and control methods.


The works of authors of the “Machine-building technologies” section are devoted to establishing the relationship between the accuracy of the finished jet engine and its component parts, as well as the algorithm for synthesizing a working part of cutting tools using the graphic-analytical method.


Please find more details below, or order your printed or electronic version of the Journal.

Preparation of Raw Materials
ArticleName New raw materials for the iron and steel industry
ArticleAuthors A. Babich, D. Senk

RWTH — Rhein-Westfalia Technical University (Aachen, Germany):

A. Babich, Dr. Eng., Prof., Dept. of Ferrous Metallurgy (IEHK), e-mail:
D. Senk, Dr. Eng., Dept. of Ferrous Metallurgy (IEHK)

ArticleName Phase transformation of molybdenum disulfide at the mechanochemical and thermal treatment on molybdenite concentrate
ArticleAuthors V. A. Martirosyan, E. G. Zakaryan, M. E. Sasuntsyan

National Polytechnic University of Armenia (Erevan, Armenia):

V. A. Martirosyan, Dr. Eng., Prof., Department of General Chemistry and Chemical Processes, e-mail:
E. G. Zakaryan, Applicant of the Department of Materials Science and Metallurgy, e-mail:
M. E. Sasuntsyan, Cand. Eng., Associate Prof., Department of General Chemistry and Chemical Processes, e-mail:

Continuous Casting and Foundry Processes
ArticleName Study of the depth of penetration of self-heating non-stick coatings in cold-hardening mixtures
ArticleAuthors I. E. Illarionov, T. R. Gilmanshina, A. A. Kovaleva, V. A. Borisyuk

Chuvash State University (Cheboksary, Russia)

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Metal science and metallurgical processes”, e-mail:


Siberian Federal University (Krasnoyarsk, Germany)
T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail:
A. A. Kovaleva, Cand. Eng., Associate Prof.
V. A. Borisyuk, Post-Graduate

Rolling and Other Metal Forming Processes
ArticleName Evaluation of the properties of steel sheet based on its electromagnetic characteristics measured in the technological line
ArticleAuthors A. Koppler, H. Hlobil, K. L. Feiste, Ch. Wulfert, Th. Boehm

Primetals Technologies Austria GmbH (Linz, Austria):

A. Koppler, Mag. Eng., Dr., e-mail:
H. Hlobil, Mag. Eng.


Fortec Forschungstechnik GmbH (Wunstorf, Germany):
K. L. Feiste, Dr. Eng.
Ch. Wulfert, Mag. Eng.


thyssenkrupp Steel Europe AG (Bochum, Germany):
Th. Boehm

ArticleName Calculation technique for deformation and energy-power parameters in combined rotary drawing and cross rolling of wheel disks
ArticleAuthors E. A. Maksimov, R. L. Shatalov, E. V. Krutina

Intrai CJSC (Chelyabinsk, Russia):

E. A. Maksimov, Cand Eng., e-mail:


Moscow Polytechnic university (Moscow, Russia):
R. L. Shatalov, Dr. Eng., Prof. of Metal Forming and Additive Technologies Dept.
E. V. Krutina, Cand. Eng., Associate Prof. of Metal Forming and Additive Technologies Dept.

ArticleName Drawing low rectangular boxes from shaped billets
ArticleAuthors V. D. Kukhar, A. N. Malyshev, Yu. V. Bessmertnaya

Tula State University (Tula, Russia):

V. D. Kukhar, Dr. Eng., Prof., Head of “Theoretical Mechanics” Dept.
Yu. V. Bessmertnaya, Cand. Eng., Associate Prof., “Mechanics of Plastic Forming” Dept., e-mail:


Bauman Moscow State Technical University — Kaluga affiliate (Kaluga, Russia):
A. N. Malyshev, Cand. Eng., Associate Prof., “Machine-building Technologies” Dept.

Power Engineering and Ecology
ArticleName Issues of implementing the best available technologies in the steel industry of the Russian Federation
ArticleAuthors I. V. Butorina, M. V. Butorina

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

I. V. Butorina, Dr. Eng., Prof.


Baltic State Technical University (St. Petersburg, Russia):
M. V. Butorina, Cand. Eng., Associate Prof., e-mail:

ArticleName Experience of red mud processing with obtaining a number of valuable elements (Sc, Zr, Y) and iron-containing raw materials for the steel industry
ArticleAuthor I. N. Pyagay

Institute of Solid State Chemistry of the Ural branch of Russian Academy of Sciences (Ekaterinburg, Russia):

I. N. Pyagay, Dr. Techn., Leading Scientific Researcher, e-mail:

ArticleName The actual problems of current decarbonization
ArticleAuthor J. Prammer

voestalpine AG (Linz, Austria):

J. Prammer, Head of Strategic Direction of Environment Management, e-mail:

Metal Science and Metallography
ArticleName Cobalt-base amorphous alloy production quality management
ArticleAuthors O. I. Boriskin, D. I. Blagoveshchenskiy, V. Yu. Vvedenskiy, G. A. Nuzhdin

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute


State Regional Center for Standardization, Metrology and Testing in Tula Region (Tula, Russia):
D. I. Blagoveshchensky, Cand. Eng.


National University of Science and Technology “MISiS” (Moscow, Russia):
V. Yu. Vvedenskiy, Cand. Phys.-Math., Associate Prof.
G. A. Nuzhdin, Cand. Eng., Associate Prof., e-mail:

ArticleName Hydrogen atoms in steel
ArticleAuthors T. Hickel, D. Ponge, M. Rohwerder, J. Neugebauer, D. Raabe

Max-Plank Institute for Iron Research (Düsseldorf, Germany):

T. Hickel, e-mail:

D. Ponge

M. Rohwerder

J. Neugebauer

D. Raabe

ArticleName Extremal strength caused by ultimate steel deformation
ArticleAuthors Ch. Kirchlechner, S. Djaziri, Yujiao Li, M. Herbig, B. Grabowski, G. A. Nematollahi, S. Goto, R. Kirchbeim, J. Neugebauer, D. Raabe, G. Dehm

Max-Plank Institute for Iron Research (Düsseldorf, Germany):

Ch. Kirchlechner, e-mail:

S. Djaziri

Yujiao Li
M. Herbig

B. Grabowski

G. A. Nematollahi
S. Goto

R. Kirchbeim

J. Neugebauer

D. Raabe

G. Dehm

Metal Working
ArticleName Influence of hereditary technological errors of production of a basic pipe on parameters of the assembled propulsion section
ArticleAuthors A. S. Vasilyev, A. S. Yamnikov, O. A. Yamnikova, I. A. Matveev

Bauman Moscow State Technical University (Moscow, Russia):

A. S. Vasilyev, Dr. Eng., Prof., Head of the Machine-building Technology Dept.


Tula State University (Tula, Russia):
A. S. Yamnukov, Dr. Eng., Prof., Machine-building Technology Dept.
I. A. Matveev, Post-graduate, Engineer


“Splav” Scientific-production corporation (Tula, Russia):
O. A. Yamnikova, Dr. Eng., Prof., 1st category specialist in risks management, e-mail:

ArticleName Algorithm for graphic analytical synthesis of shaped tools with skew teeth
ArticleAuthor V. V. Istotskiy

“RIT-Engeneering” Scientific and production enterprise (Chekhov, Russia):

V. V. Istotskiy, Cand. Eng., Director on Scientifi c and Technical Development, e-mail:

Conferences and Exhibitions
ArticleName XV International congress of steelmakers
ArticleAuthors A. E. Semin, L. E. Shchukina
* * *
ArticleName Iron and Steel News
Journals →  Chernye Metally →  2019 →  #1