Journals →  Chernye Metally →  2017 →  #11

Chernye Metally

The 11th issue of “Chernye metally” journal (2017) is opened by the usual sections “Iron and steel news of the world” and “Innovations of the metallurgical companies”.

85th anniversary of Magnitogorsk Iron and Steel Wokrs is presented in this issue by two publications: the interview of Pavel Shilyaev, CEO, and the report about the innovative technology of manufacture of cold-resistant rolled steel Arc for the largest nuclear ice-breakers “Arktika”, “Sibir” and “Ural”.


Ironmaking” section is presented by the paper from Ukraine. The specialists from the Iron and Steel Institute (Dnepr) have presented the main regulations of blowing-in of blast furnaces after long-term stoppings without tapping of freezing iron in the conditions of one metallurgical enterprise of “Metalloinvest” holding.


Rolling and other metal forming processes” is the main section in this issue. Evgeny Shikhov from the metallurgical plant “Elektrostal Tyumen” (affiliate of UMMC-Steel) has described optimization of the production cycle in order to increase specific productivity of the rolling mill. Sergey Belskiy from the Lipetsk State Technical University has described the saddle coefficient and its usage for evaluation of edge thickenings of the cross section of hot-rolled strips. Publications of the foreign authors in this section are devoted to application of a tribological model at a cold rolling tandem mill and to the new system for optical measurement of cold-rolled strip in extra severe operation conditions.

The section “Power engineering and ecology” includes two articles. The specialists from I. P. Bardin Central Scientific and Research Institute on Ferrous Metallurgy have examined possibilities of efficiency rise in pyrometallurgical processing of wasted automotive catalysts using Fe-based metal collector. The authors from the VDEh Steel Institute (Düsseldorf) have suggested to decrease the number of carbon-containing reducing agents in blast furnace practice due to steel melting from primary raw materials via direct iron ore reduction by natural gas and charging of obtained metalized product in the blast furnace. Itallowstocutcarbondioxideemissions.

Yuri Adno has described the main tendencies of iron and steel development in 2017 in his paper published in the section “Economics and finances”.

You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Iron and Steel News of the World
News of Metallurgical Companies
ArticleName New high-performance measuring devices for the rail producer in Austria
ArticleAuthors A. Gerold, Ch. Böhm

voestalpine Schienen GmbH (Leoben, Austria)

Gerold A., Mag. Eng., Technological and Testing Equipment


Nextsense GmbH (Graz, Austria)
Böhm Ch., Marketing Manager, e-mail:

ArticleName New section rolling mill with up-to-date housingless breakdown stand
ArticleName Lowering of dust emission owing to rotation unloader
ArticleName Exact reveal of defect areas in coils
Source thyssenkrupp Steel Europe / Eurofer / Octum
ArticleName Reliable temperature measurement by a portable logometric Cellaport pyrometer
Source Keller HCW GmbH
ArticleName New thermal vision chambers of Testo SE providing better vision quality
Source Testo SE & Co. KGaA
85th anniversary of Magnitogorsk Iron and Steel Works
ArticleName The interview of P. V. Shilyaev, General Director
ArticleName Rolled products of Magnitogorsk Iron and Steel Works conquer Arctics
ArticleAuthors S. V. Denisov, M. N. Mychak

Magnitogorsk Iron and Steel Works (Magnitogrsk, Russia):

Denisov S. V., Chief Specialist on Development, Scientific and Technical Centre, E-mail:
Mychak M. N., Leading Specialist, Scientific and Technical Centre, E-mail:

ArticleName The basic conditions of blowing of a blast furnace after its durable stopping for more than 80 days without tapping of freezing iron
ArticleAuthors Yu. S. Semenov, V. V. Horupakha, E. I. Shumelchik

1Iron and Steel Institute of the National Academy of Sciences of Ukraine (Dnipro, Ukraine) ; 2Scientific Technical Company ISD (Dnipro, Ukraine):

Semenov Yu. S., Dr. Eng., Senior Researcher1,2, e-mail:
Horupakha V. V., Researcher1,2
Shumelchik E. I., Dr. Eng., Senior Researcher1,2

Rolling and metal forming
ArticleName System optimization of utilization of rolling production capacities
ArticleAuthor E. A. Shikhov

UMMC-Steel, Metallurgical Plant “Elektrostal Tyumen” (Tyumen, Russia):

Shikhov E. A., Leading Eng., Automatic Control Systems Dept., e-mail:

ArticleName Parameters of evaluation of shape cross section of hot-rolled steel strips. Message 2. The saddle coefficient
ArticleAuthor S. M. Belskiy

Lipetsk State Technical University (Lipetsk, Russia):

Belskiy S. M., Dr. Eng., Prof., e-mail:

ArticleName Expanded tribological simulation in cold rolling of sheet metal
ArticleAuthors M. Bergmann, K. Krimpelstaetter, B. Smeulders, P. Schellingerhout, D. Paesold, D. Strasser, A. Kainz, K. Zeman

Primetals Technologies Austria GmbH (Linz, Austria):

Bergmann M., Mag. Eng., Dept. of Technology and Innovation, Hot and Cold Rolling Mills, E-mail:
Krimpelstaetter K., Mag. Eng., Dr., Dept. of Technology and Innovation, Hot and Cold Rolling Mills

Quaker Chemical B.V. (Uithoorn, Netherlands):
Smeilders B., Dr., Scientific Researcher
Schellingerhout P., Manager on Scientific-Research and Engineering Works


voestalpine Stahl GmbH (Linz, Austria):
Paesold D., Mag. Eng., Dr., Senior Expert on Research and Development of Coated Strip

Johannes Kepler University (Linz, Austria):
Strasser D., Mag. Eng., Research Assistant
Kainz A., Mag. Eng., Dr., University Assistant
Zeman K., Mag. Eng., Prof., Dr., Bpard of the Institute on Development of Mechatronic Products

ArticleName High-efficient optical system for strip dimensions measuring during cold rolling
ArticleAuthors E. Roller, S. Schober

Friedrich Vollmer Feinmessgerätebau GmbH (Hagen, Germany):

Roller E., Head of Sales Dept., e-mail:


Philipp Boecker + Wender Stahl GmbH & Co. KG (Iserlohn, Germany):
Schober S., CEO

Power Engineering and Ecology
ArticleName Efficiency rise of pyrometallurgical processing of wasted automotive catalysts using Fe-based metal collector
ArticleAuthors A. S. Kirichenko, A. N. Seregin

I. P. Bardin Central Scientific and Resarch Institute on Ferrous Metallurgy (Moscow, Russia):

Kirichenko A. S., Scientific Researcher
Seregin A. N., Cand. Chem., Head of the Center of Ferroalloys and Technogenic Raw Materials, e-mail:

ArticleName Flexible solutions in the iron and steel industry for reducing of carbon dioxide emissions and increase of production efficiency
ArticleAuthors H. B. Lungen, M. Sprecher

VDEh Steel Institute (Düsseldorf, Germany):

Lüngen H. B., Dr. Eng., Head of Technological Dept., e-mail:
Sprecher M., Mag. Sc.

Economics and fi nances
ArticleName Metallurgy 2017: realities and hopes
ArticleAuthor Yu. L. Adno

Institute of the World Economy and International Relations (Moscow, Russia):

Adno Yu. L., head of the sector, e-mail:

Journals →  Chernye Metally →  2017 →  #11