Journals →  Chernye Metally →  2017 →  #7

Chernye Metally


The 7th issue of “Chernye Metally” journal (2017) contains the most of its conventional sections. It is opened, as usual, by the section “Iron and steel news of the world” and “News of metallurgical companies”.


The first article (“Continuous casting” section) is devoted to the semi-continuous casting process SCIC for special steels. Another publication in this section describes new possibilities of Dillinger company in mastering of grade and dimension ranges for vertical continuous casters manufacturing thick slabs.


Three papers are devoted to rolling processes. The first of them observes optimization of rolls at hot rolling mills by Sulzau-Werfen company, the second presents up-to-date technologies of roll manufacture for heavy plate mills by Walzen Irle, and the third gives recommendations for the continuous rolling technology of complicated shapes at EVRAZ Consolidated West-Siberian Metallurgical Works.


A.P. Kolikov and his colleagues has analyzed the results of simulation of plastic forming of strip billet in large diameter tube making and has evaluated the stress-strain parameters of metal along the whole technological chain. Another article on tube and pipe production is prepared by Byelorussian specialists; they have done metallographic analysis of plug structure, have examined chemical and phase composition of oxidized coating as well as distribution of the elements and identification of coating substructure.


The section “Power engineering and ecology” is opened by the paper of DeVeTec company about energy plants for self-produced waste heat. These plants maximally use secondary energy from industrial processes with simultaneous electric current generation. Another articles in this section consider the problems of cutting CO2 emissions at the works of POSCO, SSAB and thyssenkrupp.


The issue also includes publications in the following sections: “HR policy and labour protection”, “Economics and finances” and “Heirs of Prometeus”. Publication in the last section is devoted to Anatoly Dyakov, the famous scientist, astronomer by education and mission, who has worked for many decades in the helio-meteorological laboratory at Kuznetsk metallurgical works in Western Siberia.


You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Iron and Steel News of the World
News of Metallurgical Companies
ArticleName Reaching competitive advantages through modernization as the basic principle of SMS Group
ArticleAuthor D. Rosenthal

SMS Group (Duesseldorf, Germany):

Rosenthal D., Reaching competitive advantages through modernization as the basic principle of SMS Group, e-mail:

ArticleName Development tendencies of Primetals Technologies
ArticleAuthor Y. Yamasaki

Primetals Technologies (UK, London):

Yamasaki Y., Development tendencies of Primetals Technologies, e-mail:

ArticleName Recent innovations and technological simulation at Andritz Group
ArticleAuthor J. Schonbeck

Andritz Group (Graz, Austria):

Schoenbeck J., Recent innovations and technological simulation at Andritz Group, e-mail:

Continuous casting
ArticleName Vertical continuous caster of Dillinger: the new technological level
Rolling and other metal forming processes
ArticleName Optimization of rolls for hot rolling mills providing better efficiency
ArticleAuthors M. Brandner, L. Elizondo, Th. Trickl, A. Paar, S. Hardt

Eisenwerk Sulzau-Werfen (Tenneck, Austria):

Brandner M., Mag. Eng., Quality Manager / Technical Advisor, e-mail:
Elizondo l., Mag. Eng.
Trickl Th., Mag. Eng.
Paar A., Mag. Sc., R & D Engineer
Hardt S., Dr. Eng., Technical Sales Support

ArticleName Modern technologies of work roll production for flat rolling
ArticleAuthors J. Kruger, P. von Schweinichen, A. Mayr, S. Mehlau, R. Kaiser

Walzen Irle GmbH (Netphen, Germany):

Krüger J., Mag. Eng., CEO
von Schweinichen P., Dr. Eng., Deputy Head of Casting Production
Mayr A., Dr. Eng., R&D Technical Consulting of Customers, e-mail:
Mehlau S., Mag. Eng., R&D Technical Consulting of Customers
Kaiser R., Dr. Eng., Head of Quality Control

ArticleName Study of torques during rolling of tram rails in continuous reversing group of stands
ArticleAuthors S. V. Smetanin, V. N. Peretyatko

EVRAZ Consolidated West-Siberian Metallurgical Plant (Novokuznetsk, Russia):

Smetanin S. V., Cand. Eng., Head of the Central Laboratory of automation and mechanization of rail production, E-mail:


Siberian State Industrial University (Novokuznetsk, Russia):
Peretyatko V. N., Dr. Eng. Prof., Chair of Metal Forming and Metal Science

Tube making
ArticleName Mathematical simulation of strip plastic deformation process in the whole technological stage of manufacture of large-diameter tubes
ArticleAuthors A. P. Kolikov, D. Yu. Zvonarev, I. M. Taupek, T. Yu. Sidorova

National University of Science and Technology “MISiS” (Moscow, Russia):

Kolikov A. P., Dr. Eng., Prof., Chair of Metal Forming, e-mail:


All-Russian Scientific and Research Institute of Tube Industry - RosNITI (Chelyabinsk, Russia):
Zvonarev D. Yu., Cand. Eng., Head of Laboratory


Staryi Oskol Technological Institute named after A. A. Ugarov — affiliate of National University of Science and Technology “MISiS” (Staryi Oskol, Russia):
Taupek I. M., Post-Graduate
Sidorova T. Yu., Senior Lecturer, Chair of Metal Forming

ArticleName Study of the effect of features of oxidized coating of piercing plugs on their operating resistance
ArticleAuthors Yu. L. Gerasimov, S. V. Avdeev, Yu. L. Bobarikin

Byelorussian Steel Works — Management Company of “Byelorussian Metallurgical Company” Holding (Zhlobin, Belarus):

Gerasimov Yu. L., Mag. Tech., e-mail:
Avdeev S. V., Mag. Tech.


Gomel State Technical University named after P. O. Sukhoy (Gomel, Belarus):
Bobarikin Yu. L., Cand Eng.

Power engineering and ecology
ArticleName High-efficient usage of waste heat in metallurgy
ArticleAuthor M. Schmidt

DeVeTec GmbH (Saarbrücken, Germany):

Schmidt M., Manager, e-mail:

ArticleName Who is ready to cut emissions?
ArticleName Melting shop and nuclear power station
ArticleAuthor E. Pasche

Willich, Germany:

Pasche E., Dr. Eng., e-mail:

Industry 4.0 and innovative Development
ArticleName Industry 4.0 as the basis of modern metallurgical innovations
ArticleAuthor H. Peters

VDEh Institute of Industrial Researches (Düsseldorf, Germany):

Peters H., Dr. Eng., Head of Dept. of Measuring Sensors and Automation, e-mail:

HR policy and labour protection
ArticleName Role of designers-technologists in providing safety of created industrial objects
ArticleAuthor A. B. Netkachev

Ural State Federal University (Ekaterinburg, Russia):

Netkachev A. B., Cand. Eng, Associate Prof., Specialist in Designing of Metallurgical Processes, Institute of New Materials and Technologies, e-mail:

ArticleName Professional behaviour of HR specialists during meeting with job applicants
ArticleAuthor A. Walz

Conciliat GmbH (Stuttgart, Germany):

Walz A., Head of HR Dept.

ArticleName The aged employees as an important corporate basis
Economics and finances
ArticleName Iron and steel industry requires distinct rules to provide fair competition
ArticleAuthor H. J. Kerkhoff

Steel Institute of the Union of German Metallurgists (Düsseldorf, Germany):

Kerkhoff H. J., President of “Steel” Economical Union, e-mail:

ArticleName Analysis of Brazilian current economic development
ArticleAuthor L. Subran

Euler Hermes Gruppe (Paris, France):

Subran L., Chief Economist, e-mail:

Heirs of Prometheus
ArticleName Sunny man from Temirtau
ArticleAuthor L. A. Vaisberg

REC “Mekhanobr-Tekhnika” (St. Petersburg, Russia):

Vaisberg L. A., Dr. Eng., Prof., RAN Academician, Head of the Board of Directors, Scientific Advisor, e-mail:

Journals →  Chernye Metally →  2017 →  #7