Tsvetnye Metally
The 6th issue of the journal “Tsvetnye Metally” (Non-ferrous metals) (June 2017) shares the issues of theory and practice of ore dressing, complex use of crude ore, production and processing of non-ferrous metals, materials science, etc.
The “Benefication” item is devoted to the 20th anniversary of the Gold Mining Company UGC: the results of improvement of gold-bearing ore processing technologies at the company’s dressing plants are shown.
The item “Noble metals and alloys” conveys the results of pilot testings regarding the technology for processing of Ag-Pb-Zn accumulators in order to obtain silver. The process flowsheet is described and is ready for implementation.
The article by G. D. Apalkova (item “Light metals and carbon materials”) tells about the rammability of aluminum electrolyzer's carbon pastes.
Authors from the I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials researched the solution, obtained during the nitric-acid decomposition of perovskite concentrate. The conclusion was that, together with titanium magnetite and sphene, perovskite belongs to non-traditional titanium raw materials and, fulfilling all the requirements of its complex processing, it makes it possible to obtain products that contain not only Ti, but also Ta, Nb and rare-earth metals.
The article by M. L. Kotsar, V. N. Kaplenkov and Z. M. Alekberov presents an analysis of possible reasons for cracking of titanium alloy products, belonging to the heat-exchange equipment of nuclear energetic tools. Such cracking usually happens as a result of hydration.
You may find below more details about the issue or book printed or electronic version of the journal.
| BENEFICATION | |
| Название | Intensification of pulp separation in beryllium production |
| Авторы | Tolkachev V. A., Paskhin N. P., Maynikov D. V. |
| Информация об авторах | All-Russian Research Institute of Chemical Technology, Moscow, Russia: |
| Название | Operating results of the flotation machines CFM in the industrial schemes of dressing of copper, copper-zinc and lead-zinc ores |
| Авторы | Viduetskiy M. G., Maltsev V. A., Panshin A. M., Yochev I. |
| Информация об авторах | TPC “Project institute”, Ural Federal University, Ekaterinburg, Russia:
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
“Rudmetal” AD, Rudozem, Bulgaria: |
| Название | Heap biooxidation of the off-balance gold-sulfide and polymetallic ores and final tailings |
| Авторы | Seleznev A. N., Epiforov A. V., Emelyanov Yu. E., Balikov S. V. |
| Информация об авторах | Irkutsk Research Institute of Precious and Reare metals and Diamonds, Irkutsk, Russia: |
| Название | Improvement of processing technologies for gold-bearing ores at the concentrators of the gold mining company UGC |
| Авторы | Strukov K. I., Plotnikov S. N., Nikolaev Yu. L., Patskevich P. G. |
| Информация об авторах | Gold mining company UGC, Chelyabinsk, Russia: K. I. Strukov, President
JSC “Irgiredmet”, Irkutsk, Russia:
Research Institute of Comprehensive Exploitation of Mineral Resources (IPKON) RAS, Moscow, Russia: |
| Название | The choice of methods of gold-arsenic ores processing (Novotroitsk deposit) taking into account their technological peculiarities |
| Авторы | Strukov K. I., Plotnikov S. N., Zyryanova L. A., Nikolaev Yu. L. |
| Информация об авторах | Gold mining company UGC, Chelyabinsk, Russia: K. I. Strukov, President
JSC “Irgiredmet”, Irkutsk, Russia: |
| HEAVY NON-FERROUS METALS | |
| Название | Analysis of one of the shaft furnace modernization ways |
| Автор | Korol Yu. A. |
| Информация об авторе | Yu. A. Korol, Metallurgical Engineer, Ekaterinburg, Russia, e-mail: tsvetmet@rudmet.ru |
| NOBLE METALS AND ALLOYS | |
| Название | Factory testings of silver obtaining from silver-lead-zinc accumulators by two-stage smelting |
| Авторы | Rogov S. I., Boboev I. R., Atmadzhidi A. S., Ryabova A. V. |
| Информация об авторах | Shchyolkovo Plant of Secondary Precious Metals, Shchyolkovo, Russia: S. I. Rogov, Director of Economic Affairs
National University of Science and Technology “MISiS”, Moscow, Russia: A. S. Atmadzhidi, Post-Graduate Student |
| LIGHT METALS AND CARBON MATERIALS | |
| Название | Assessment of effect of coagulation and sedimentation of dust particles on operation stability of aluminium electrolyzer burners |
| Авторы | Shakhray S. G., Dekterev A. A., Skuratov A. P., Klimovich L. V. |
| Информация об авторах | Siberian Federal University, Krasnoyarsk, Russia: S. G. Shakhray, Assistant Professor, Chair of Technosphere Safety of Mining and Metallurgical Production, e-mail: shahrai56@mail.ru |
| Название | Rammability of aluminum electrolyzer's carbon pastes |
| Автор | Apalkova G. D. |
| Информация об авторе | South Ural State University, Chelyabinsk, Russia: G. D. Apalkova, Professor, e-mail: apalkova@yandex.ru |
| RARE METALS, SEMICONDUCTORS | |
| Название | Release of iron-thorium cake from technological solutions after nitric acid opening of perovskite concentrate |
| Авторы | Mudruk N. V., Korovina Yu. V., Elizarova I. R., Nikolaev A. I. |
| Информация об авторах | I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Science Center RAS), Apatity, Russia: N. V. Mudruk, Junior Researcher, e-mail: kirnat@chemy.kolasc.net.ru |
| Название | Processing of rhenium-bearing molybdenite concentrates. Part 2. Catching and extraction of rhenium from sublimates |
| Авторы | Sitdikov F. G., Galkova L. I., Pikulin K. V., Selivanov E. N. |
| Информация об авторах | JSC Industrial and Creative Enterprise “Rezonans”, Ekaterinburg, Russia: F. G. Sitdikov, Chief Executive Officer
Institute of Metallurgy of Ural Branch of RAS, Ekaterinburg, Russia: |
| COMPOSITES AND MULTIPURPOSE COATINGS | |
| Название | Investigation of wetting and spreading of aluminium on titanium during the formation of aluminium – titanium foam composite materials |
| Авторы | Kovtunov A. I., Khokhlov Yu. Yu., Myamin S. V. |
| Информация об авторах | Togliatti State University, Togliatti, Russia: A. I. Kovtunov, Professor, e-mail: akovtunov@rambler.ru |
| MATERIALS SCIENCE | |
| Название | Prospective ways of development of directional solidification techniques for turbine blades manufacturing. Part 2 |
| Автор | Iakovlev E. I. |
| Информация об авторе | All-Russian Institute of Aviation Materials, Moscow, Russia: E. I. Iakovlev, Leading Engineer, e-mail: y-e-i@yandex.ru |
| Название | Obtaining the high-pure titanium based alloys. Investigation of their composition and properties |
| Авторы | Kotsar M. L., Kaplenkov V. N., Alekberov Z. M. |
| Информация об авторах | Leading scientific-investigation institute of chemical technology (VNIIKhT), Moscow, Russia: M. L. Kotsar, Head of Laboratory, e-mail: kotsar@vniiht.ru |
| METAL PROCESSING | |
| Название | Theoretical and experimental investigations of copper plates dressing and rolling |
| Авторы | Maksimov E. A., Shatalov R. L. |
| Информация об авторах | JSC “Intray”, Chelyabinsk, Russia: E. A. Maksimov, Head of Technical Branch, e-mail: maksimov50@mail.ru
Moscow Polytechnical University, Moscow, Russia: R. L. Shatalov, Professor, e-mail: mmomd@mail.ru |
