• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Tsvetnye Metally →  2011 →  №1 →  Назад

Metal processing
Название The analysis of method of obtaining of exact cylindrical billets from non-ferrous alloys for thinwalled detailes as cup
Автор Borisovskaia V. A.
Информация об авторе V. A. Borisovskaya, Candidate, National Technical University “Kharkiv Polytechnic Institute”.
Реферат
Тhe analysis of manufacturing methods of billet which are made with cold forging methods specifically details like cup. The well-know methods of production of cylindrical aluminium billets have been considered, their advantages and disadvantages have been described. It is shown that a level of quality and accuracy influences on technological process which depends on a possibility of getting of billet precise volume.
Ключевые слова Billet, cold forging, part, quality, accuracy, sleeve type of details, analysis.
Библиографический список

1. Poulsen S. C. The cold extrusion of steel. Machinery L. 1960. Vol. 97, No. 2503.

2. May O. Cold extrusion of small symmetrical and asymmetrical components. Ibid. No. 2509.

3. Golovin V. A., Golovina Z. S., Pylov V. V. and etc. Kuznechno-shtampovochnoe proizvodstvo. Forging and stamping production. 2005. No. 11. pp. 10–14.

4. Evstratov V. A. Osnovy tekhnologii vydavlivaniya i konstruirovaniya shtampov. Basics of the die tooling extrusion and design. Khar'kov, 1987. — 144 pp.

5. Antonyuk F. I., Lanskoy E. N. Kuznechno-shtampovochnoe proizvodstvo. Forging and stamping production. 2004. No. 1. pp. 19–29.

6. Antonyuk F. I., Malyshev A. N. Tam zhe. Ibid. 2005. No. 11. pp. 14-18.

7. Solovtsov S. S. Bezotkhodnaya rezka sortovogo prokata v shtampakh. Waste-free cutting of rolled section steel in stamps. Moscow, 1985. 176 pp.

8. Valiev S. A. Kholodnoe obyemnoe deformirovanie metallov : sb. seminarov. T. 2. Cold volumetric deformation of metals : seminar reports. Part 2. Moscow, 1962. pp. 90–106.

9. Finkel V. M., Golovin Yu. I., Rodyukov G. B. Kholodnaya lomka prokata. Cold breaking of rolled metal. Moscow, 1982. 192 pp.

10. Roganov L. L., Karnaukh S. G. Udoskonalennya protsesіv ta obladnannya obrobki tiskom v metalurgії ta mashinobuduvannі. Improving processes and equipment fabrication in metallurgy and mechanical engineering. Kramatorsk, 2003. pp. 376–380.
Language of full-text русский
Полный текст статьи Получить
Назад