Journals →  CIS Iron and Steel Review →  2020 →  #2

CIS Iron and Steel Review



Raw materials
ArticleName Evaluation of bulk material behavior control method in technological units using DEM. Part 2
ArticleAuthors A. V. Boikov, R. V. Savelev, V. A. Payor, A. V. Potapov
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

A. V. Boikov, Ph.D., Assistant Professor, Dept. of Automation of Technological Processes and Production, E-mail: boikov_av@mail.ru
R. V. Savelev, Student
V. A. Payor, Student

 

ESSS (Florianopolis, Brazil):
A. V. Potapov, Dr. Eng., Technical Director, ESSS Rocky DEM Chief Technology Officer

Sintering and coke chemistry
ArticleName Analysis of chemical-metallurgical agglomeration processes during charge sintering
ArticleAuthors V. I. Bobkov, M. I. Dli, A. M. Sokolov, Y. B. Rubin
ArticleAuthorsData

National Research University “Moscow Power Engineering Institute” — Smolensk Branch (Smolensk, Russia):

V. I. Bobkov, Dr. Eng., Associate Prof., E-mail: vovabobkoff@mail.ru
M. I. Dli, Dr. Eng., Prof., E-mail: midli@mail.ru
A. M. Sokolov, Magister Student

 

Moscow University for Industry and Finance "Synergy":
Y. B. Rubin, Dr. Econ., Prof., Head of the Dept. of Theory and Practice of Competition, E-mail: Yrubin@synergy.ru

Ferroalloys
ArticleName SHS Processing of cyclone ferrosilicium dust
ArticleAuthors M. Kh. Ziatdinov, I. M. Shatokhin, I. R. Manashev
ArticleAuthorsData

Tomsk State University (Tomsk, Russia):

Ziatdinov M. Kh., Dr. Eng., Leading Researcher, E-mail: ziatdinovm@mail.ru

 

NTPF “Etalon” (Magnitogorsk, Russia):
Shatokhin I. M., General Director, E-mail: mir@ntpf-etalon.ru

 

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
Manashev I. R., Cand. Eng.

Casting and foundry
ArticleName Improvement of mechanical properties of iron castings via adjusting of solidification rate
ArticleAuthors N. I. Gabelchenko, A. A. Belov, N. A. Kidalov, A. I. Gabelchenko
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

N. I. Gabelchenko, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”
A. A. Belov, Senior Lecturer, Dept. “Machines and technology of casting production”, E-mail: aa-belov@br.ru
N. A. Kidalov, Dr. Eng., Prof., Head of Dept. “Machines and technology of casting production”, E-mail: mitlp@vstu.ru

 

Lomonosov Moscow State University (Moscow, Russia):
A. I. Gabelchenko, Junior Scientific Researcher

Metal processing
ArticleName FEM study of internal stresses evolution in prestressing strands
ArticleAuthors A. G. Korchunov, E. M. Medvedeva, P. V. Ivekeeva, D. V. Konstantinov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

Korchunov A. G., Dr. Eng., Prof., Vice-Rector on International Affairs, E-mail: international@magtu.ru
Medvedeva E. M., Post-graduate Student, E-mail: fekla_med@mail.ru
Ivekeeva P. V., Post-graduate Student, E-mail: fufest01@mail.ru
Konstantinov D. V., Cand. Eng., E-mail: magstu.international@gmail.com

ArticleName Relationship of the method of obtaining the original billet with the accuracy of manufacturing of the extended axisymmetric bodies
ArticleAuthors A. S. Yamnikov, I. A. Matveev, E. N. Rodionova
ArticleAuthorsData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Dept. of Manufacturing Technology, E-mail: yamnikovas@mail.ru
E. N. Rodionova, Engineer, Post-graduate Student, E-mail: ivan_matveev@list.ru


NPO “Splav” named after A. N. Ganichev (Tula, Russia):

I. A. Matveev, Cand. Eng., Deputy Head of Production Dept., E-mail: masik-ele@yandex.ru

Tube making
ArticleName Comparative analysis of damage criteria for screw rolling using computer simulation
ArticleAuthors M. M. Skripalenko, B. A. Romantsev, S. P. Galkin, M. N. Skripalenko, A. V. Danilin
ArticleAuthorsData

MIP Rolling Mill LLC (Moscow, Russia):

M. M. Skripalenko, Cand. Eng., Associate Prof., Metal Forming Dept.

 

Istok ML LLC (Moscow, Russia):

B. A. Romantsev, Dr. Eng., Prof., Metal Forming Dept.

 

National University of Science and Technology “MISiS” (Moscow, Russia):

S. P. Galkin, Dr. Eng., Prof., Metal Forming Dept., E-mail: mms@misis.ru
M. N. Skripalenko, Cand. Eng., Associate Prof., Metal Forming Dept.
A. V. Danilin, Senior Lecturer, Metal Forming Dept.

Surface treatment and coating
ArticleName Study of synthesis processes of heat-insulating silicate materials for external protection of steel oil pipelines
ArticleAuthors E. A. Yatsenko, B. M. Goltsman
ArticleAuthorsData

Platov South Russian State Polytechnic University (Novocherkassk, Russia):

E. A. Yatsenko, Dr. Eng., Prof., Head of the Dept. “General Chemistry and Technology of Silicates”, E-mail: e_yatsenko@mail.ru
B. M. Goltsman, Cand. Eng., Associate Prof., Dept. “General Chemistry and Technology of Silicates”, E-mail: boriuspost@gmail.com

ArticleName Effect of laser treatment modes on metal surface marking color
ArticleAuthors S. M. Gorbatyuk, I. G. Morozova, M. G. Naumova, N. A. Chichenev
ArticleAuthorsData

National University of Science and Technology "MISiS":

S. M. Gorbatyuk, Dr. Eng., Prof., Head of Dept. of Engineering of Technological Equipment
I. G. Morozova, Cand. Eng., Assistant Prof., Dept. of Engineering of Technological Equipment
M. G. Naumova, Senior Researcher, Dept. of Engineering of Technological Equipment
N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, E-mail: chich38@mail.ru

Metal science and metallography
ArticleName Quantitative assessment of microstructural inhomogeneity by thickness of hot-rolled plates made of cold-resistant low-alloy steel for Arctic applications
ArticleAuthors A. A. Kazakov, D. V. Kiselev, O. V. Sych, E. I. Khlusova
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., Head of “Metallurgical Examination” Lab., E-mail: kazakov@thixomet.ru

 

“Thixomet” JSC (St. Petersburg, Russia):
D. V. Kiselev, Technical Director, “Metallurgical Examination” Lab.


National Research Center “Kurchatov Institute” — Central Research Institute of Structural Materials “Prometey” (St. Petersburg, Russia):
O. V. Sych, Cand. Eng., Head of the Sector,
E. I. Khlusova, Dr. Eng., Prof., Deputy Head of Scientific and Production Center No. 3 (NPK-3), Head of the Laboratory

ArticleName The study of influence of heat treatment procedures on structure and properties of the new high-strength steel with increased cold resistance
ArticleAuthors P. P. Poletskov, A. S. Kuznetsova, O. A. Nikitenko, D. Yu. Alekseev
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

P. P. Poletskov, Dr. Eng., Prof., Dept. of Metal Processing Technology
A. S. Kuznetsova, Senior Lecturer, Materials Processing Dept., E-mail: allakuznetsova.mgtu@mail.ru
O. A. Nikitenko, Associate Prof., Materials Processing Dept., E-mail: o.nikitenko@magtu.ru
D. Yu. Alekseev, Scientific Researcher, Termodeform-MGTU Engineering Center

ArticleName Simulation of phase transformations in high carbon pearlite steel at various cooling rates
ArticleAuthors S. A. Nevskii, Yu. N. Simonov, V. E. Kormyshev, S. V. Konovalov
ArticleAuthorsData

Siberian State Industrial University (Novokuznetsk, Russia):

S. A. Nevskii, Cand. Eng., Assistant Prof., Dept. of Natural Science

V. E. Kormyshev, Cand. Eng., Researcher, Research Dept.

 

Perm National Research Polytechnic University (Perm, Russia):

Yu. N. Simonov, Dr. Eng., Prof., Dept. of Metal Science, Laser and Thermal Treatment

 

Samara National Research University (Samara, Russia):

S. V. Konovalov, Dr. Eng., Prof., Dept. of Materials Technology and Aviation Material Science, E-mail: ksv@ssau.ru

Chemical technologies
ArticleName Extraction by electroflotation of iron, chromium and aluminium hydroxides from aqueous solutions of sodium chlorides and sulphates in the presence of Mg2+, Cа2+ and surfactants of different types
ArticleAuthors A. V. Kolesnikov, Than So Htay, V. A. Kolesnikov, V. S. Kovalenko
ArticleAuthorsData

D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

A. V. Kolesnikov, Associate Prof., Dept. “Innovative materials and corrosion protection”, E-mail: artkoles@list.ru
Than So Htay, Post-graduate Student, Dept. “Technology of inorganic substances and electrochemical processes”
V. A. Kolesnikov, Dr. Eng., Prof., Head of Dept. “Innovative materials and corrosion protection”

 

National University of Science and Technology MISiS (Moscow, Russia):
V. S. Kovalenko, Dr. Eng., Prof., Head of Dept. “Open cast mining”

Environment protection
ArticleName Titanium-containing coagulants for foundry wastewater treatment
ArticleAuthors E. N. Kuzin, N. E. Kruchinina
ArticleAuthorsData

D. Mendeleyev University of Chemical Technology of Russia (Moscow, Russia):

E. N. Kuzin, Cand. Eng., Department of Environmental Engineering, E-mail: e.n.kuzin@mail.ru

N. E. Kruchinina, Dr. Eng., Head of Faculty of Biotechnology and Environmental Engineering, Head of Department of Environmental Engineering, E-mail: krutch@muctr.ru

ArticleName Waste management for production of steel electric welding pipes using Data Mining technologies and MES systems
ArticleAuthors A. I. Shinkevich, T. V. Malysheva
ArticleAuthorsData

Kazan National Research University of Technology (Kazan, Russia):

A. I. Shinkevich, Dr. Econ., Prof., Head of the Dept. of Logistics and Management, E-mail: ashinkevich@mail.ru
T. V. Malysheva, Cand. Econ., Associate Prof., Dept. of Logistics and Management, E-mail: tv_malysheva@mail.ru

Innovative development
ArticleName Tendencies of innovation development of the Russian iron and steel industry on the base of patent analytics for the largest national metallurgical companies
ArticleAuthors S. A. Savchenkov, V. Yu. Bazhin, O. Volkova
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

S. A. Savchenkov, Cand. Eng., Deputy head of the Patent and License Dept., E-mail: savchenkov_sa@pers.spmi.ru
V. Yu. Bazhin, Dr. Eng., Associate Prof., Head of the Dept. of Automation of Technological Processes and Production, E-mail: bazhin_vyu@pers.spmi.ru

 

TU Bergakademie Freiberg (Freiberg, Germany):

O. Volkova, Dr. Ing., Prof., Director of the Institute of Iron and Steel Technology, E-mail: volkova@iest.tu-freiberg.de

Journals →  CIS Iron and Steel Review →  2020 →  #2