Journals →  Chernye Metally →  2019 →  #5

Chernye Metally



The fifth issue of the Chernye Metally journal is opened by a section dedicated to the 55th anniversary of the Technology of Materials chair (head of the chair is Zyuban N. A.) of the Volgograd State Technical University. The section includes works of VolgSTU representatives - regular authors of the journal. Studies of the structural features of cast metal ingots of various geometries used to produce round steel, as well as studies of the effect of calcium carbide as a deoxidizing agent on the chemical composition and contamination by non-metallic inclusions have been presented.

 

The following big section of the journal contains articles on new developments of the Tula State University. Representatives of this university, in particular, proposed a theoretically accurate calculation of worm milling cutters, excluding deviations depending on the profiling method. The recommendations given by the authors will allow to increase the accuracy of the worm gear-cutting milling cutters and economically use hard alloys. This section also describes the design of the centering mandrel with enhanced vibration resistance for fixing thin-walled workpieces, which provides the set values in all respects and can be used in production.

 

The Heating and Heat Treatment section includes an article devoted to the study of the effect of heat treatment on residual stresses formation. The authors of the Nizhny Novgorod State Technical University proposed a method for their determination in samples of 5KhNM grade steel.

 

In the section devoted to the 74th anniversary of the Victory Zaparya V. V. and his colleagues from the Ural Federal University and the Institute of History and Archeology, Ural Branch of the Russian Academy of Sciences, posted the information detailing the history of creation of the 8C anti-tank armor for T-34 tanks during the Great Patriotic War.

 

Metallurgy news from various countries conclude the fifth issue.

 

Please find more details below, or order your printed or electronic version of the Journal.


55th anniversary of department “Technology of Materials” of Volgograd State Technical University
ArticleName Study of features of cast metal structure of ingots with different geometry used for obtaining round bars
ArticleAuthors N. А. Zyuban, D. V. Rutskiy, S. B. Gamanyuk, M. V. Kirilichev
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

N. A. Zyuban, Dr. Eng., Prof., Head of the Dept “Technology of Materials”, e-mail: tecmat@vstu.ru
D. V. Rutskiy, Cand. Eng., Associate Prof.
S. B. Gamanyuk, Cand. Eng., Associate Prof.
M. V. Kirilichev, Post-Graduate

ArticleName Influence of calcium carbide as a deoxidizer on the chemical composition and contamination by nonmetallic inclusions
ArticleAuthors D. V. Rutskiy, N. А. Zyuban, I. V. Neklyudov, A. Yu. Agarkov
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

D. V. Rutskiy, Cand. Eng., Associate Prof.
N. A. Zyuban, Dr. Eng., Prof., Head of the Dept “Technology of Materials”, e-mail: tecmat@vstu.ru

 

Volzhsky Pipe Plant (Volzhsky, Russia):
I. V. Neklyudov, Chief Metallurgist
A. Yu. Agarkov, Leading Engineer Technologist, Steel Making and Casting Lab, Central Plant laboratory

New developments of Tula State University
ArticleName Error analysis of evolvent worm milling cutters with carbide-tipped multi-faceted inserts
ArticleAuthors O. I. Boriskin, N. G. Stakhanov, I. V. Gorynina
ArticleAuthorsData

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute
N. G. Stakhanov, Cand. Eng., Prof.
I. V. Gorynina, Post-Graduate, E-mail: goriv1356@gmail.com

ArticleName Determination of the rational strategy for manufacturing «Case»-type articles from steel by rotary drawing
ArticleAuthors V. I. Tregubov, S. N. Larin, N. A. Usenko, E. V. Osipova
ArticleAuthorsData

Tula State University (Tula, Russia):

V. I. Tregubov, Dr. Eng., Prof., Dept. “Mechanics of Plastic Forming”, e-mail: mpf-tula@rambler.ru
S. N. Larin, Dr. Eng., Associate Prof., Head of the Dept. “Mechanics of Plastic Forming”
E. V. Osipova, Leading Specialist

 

NPO “Splav” (Tula, Russia):

N. A. Usenko, Dr. Eng., Prof., Dept. “Mechanics of Plastic Forming”

ArticleName Analysis of friction surfaces of structural steels after their hardening by methods based on electrical technologies
ArticleAuthors A. A. Malikov, E. V. Markova, N. B. Fomicheva, O. V. Chechuga
ArticleAuthorsData

Tula State University (Tula, Russia):

A. A. Malikov, Dr. Eng., Prof., Dept. “Machinebuilding Technology”
E. V. Markova, Cand. Eng., Associate Prof., Dept. “Machinebuilding Technology”, e-mail: marta06@yandex.ru
N. B. Fomicheva, Cand. Eng., Associate Prof., Dept. “Metal Physics and Material Science”
O. V. Chechuga, Cand. Eng., Associate Prof., Dept. “Machinebuilding Technology”

ArticleName Manifestation of technological heredity when turning non-rigid tubular billets
ArticleAuthors A. S. Yamnikov, I. A. Matveev, E. N. Rodionova
ArticleAuthorsData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Dept. “Machinebuilding Technology”, e-mail: yamnikovas@mail.ru
I. A. Matveev, Engineer, Post-Graduate, Dept. “Machinebuilding Technology”, e-mail: ivan_matveev@list.ru


NPO “Splav” (Tula, Russia):

E. N. Rodionova, Engineer, Post-Graduate, Head of Central measurement Laboratory

ArticleName Optimization of cutting speed and tool replacement in the processing of ferrous metals, taking into account the spread of tool lifetime
ArticleAuthors A. V. Antsev, N. I. Pasko, N. V. Antseva
ArticleAuthorsData

Tula State University (Tula, Russia):

A. V. Antsev, Cand. Eng., Associate Prof., e-mail: a.antsev@yandex.ru
N. I. Pasko, Dr. Eng., Prof.
N. V. Antseva, Cand. Eng., Associate Prof.

ArticleName The interdependence of the substructure and wear resistance of surface-hardened structural steels
ArticleAuthors L. M. Nechaev, N. B. Fomicheva, E. V. Markova
ArticleAuthorsData

Tula State University (Tula, Russia):

L. M. Nechaev, Cand. Phys.-Math., Prof., Dept. “Theoretical Mechanics”, e-mail: nech47@yandex.ru
N. B. Fomicheva, Cand. Eng., Associate Prof., Dept. “Metal Physics and Material Science”
E. V. Markova, Cand. Eng., Associate Prof., Dept. “Machinebuilding Technology”

ArticleName The centering mandrel of the increased vibration resistance for milling of thin-walled sleeves
ArticleAuthors A. S. Yamnikov, M. N. Bogomolov
ArticleAuthorsData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Dept. “Machinebuilding Technology”, e-mail: yamnikovas@mail.ru
M. N. Bogomolov, Engineer, Post-Graduate, Dept. “Machinebuilding Technology”

ArticleName Features of cutters for machining of threaded surfaces with a low pinch
ArticleAuthors D. B. Belov, O. I. Boriskin, S. I. Solovyev
ArticleAuthorsData

Tula State University (Tula, Russia):

D. B. Belov, Cand. Eng.
O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute
S. I. Solovyev, Cand. Eng., Associate Prof., e-mail: sergei59@bk.ru

Heating and heat treatment
ArticleName Effect of thermal treatment on formation of residual stresses and the method of their determination in samples from 5KhNM steel
ArticleAuthors A. A. Khlybov, D. A. Ryabov, T. V. Nuzhdina, K. A. Minkov
ArticleAuthorsData

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):

A. A. Khlybov, Dr. Eng., Prof., head of Dept. “Material science, technologies of materials and heat treatment of metals”, e-mail: hlybov_52@mail.ru
D. A. Ryabov, Engineer, Dept. “Material science, technologies of materials and heat treatment of metals”
T. V. Nuzhdina, Cand. Eng., Associate Prof., Dept. “Material science, technologies of materials and heat treatment of metals”

 

Ruspolimet (Kulebaki, Russia):
K. A. Minkov, Post-Graduate, Leading Engineer

Meeting 74th anniversary of the Victory
ArticleName The history of creating cannon-proof 8S armor
ArticleAuthors N. N. Melnikov, B. A. Gizhevskiy, Vas. V. Zapariy, V. V. Zapariy
ArticleAuthorsData

Institute of History and Archeology, Ural branch of the Russian Academy of Sciences (Ekaterinburg, Russia):

N. N. Melnikov, Cand Hist., Associate Prof.
Vas. V. Zapariy, Cand Hist., Associate Prof.

 

Institute of metal Physics, Ural branch of the Russian Academy of Sciences (Ekaterinburg, Russia):
B. A. Gizhevskiy, Cand Phys.-Math.

 

Ural Federal University (Ekaterinburg, Russia):
Vl. V. Zapariy, Dr. Hist., Prof., Dept. of Gistory and Social relations, e-mail: vvzap@gmail.com

* * *
ArticleName Iron and Steel News
Journals →  Chernye Metally →  2019 →  #5