Journals →  Tsvetnye Metally →  2014 →  #11

Tsvetnye Metally


 

The 11-th issue of «Tsvetnye Metally» (Non-ferrous metals) journal (November, 2014) traditionally includes the «International review of market of non-ferrous metals».

 

The article by B. A. Kotlyar, published in the section «Economics and management of production», tells about the reasonability of setting of dispositive standard of minimal wage of workers in sectoral tariff agreement.

 

The section «Heavy non-ferrous metals» includes the articles, written by the members of hydrometallurgy department of Scientific and Production Association «RIVS», devoted to the scientific-practical conference «RIVS-2014».

 

The articles, published in the section «Nanostructured materials and metals», consider the problems of obtaining of nanostructured metallic nickel- and palladium-based materials, and influence of catalyst metal layer on carbon nanopipes' morphology.

 

The article, dedicated to the memory of E. M. Bychkov, is published within the section «To the 90-th anniversary of the Journal», where readers can get an information about people, who made a great contribution to development of Russian non-ferrous metallurgy and «Tsvetnye Metally» journal.

 

Editorial board of the Journal present congratulations to the State Hermitage Museum, which celebrates its 250-th anniversary in 2014.


You can find more details about this issue below or by ordering the printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.
ArticleAuthorData

Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail: nirsks@yandex.ru

ArticleName Minimal wage as an institution of labor and metal products market. Part 1
ArticleAuthor Kotlyar B. A.
ArticleAuthorData

TsNOTORGMET Consulting-Analytical Center, Moscow, Russia:

B. A. Kotlyar, Chief Executive Officer, e-mail: tsnot@yandex.ru

BENEFICATION
ArticleName Test of reagent modes of gold-containing ore flotation with application of modified diethyl dithiocarbamate and dithiocarbamic acid thioester
ArticleAuthors Matveeva T. N., Lantsova L. B.
ArticleAuthorsData

Research Institute of Comprehensive Exploitation of Mineral Resources, Moscow, Russia:

T. N. Matveeva, Head of Laboratory of Mineral Components Separation Theory, e-mail: tmatveyeva@mail.ru
L. B. Lantsova, Leading Engineer

HEAVY NON-FERROUS METALS
ArticleName Thermal physic peculiarities of process of slag components rolling in rotary furnace. Part 1
ArticleAuthors Panshin A. M., Matyukhin V. I., Kozlov P. A., Matyukhin O. V.
ArticleAuthorsData

LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:

A. M. Panshin, Technical Director

 

Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia:
V. I. Matyukhin, Assistant Professor, Chair of Thermal Physics and Informatics in Metallurgy, e-mail: matyhin53@mail.ru
O. V. Matyukhin, Assistant Professor

 

JSC “Chelyabinsk zinc plant”, Chelyabinsk, Russia:
P. A. Kozlov, Head of Engineering Center

Scientific-practical conference of scientific and production association “RIVS”
ArticleName Copper-containing dumps as a prospective source of copper obtaining
ArticleAuthors Trubilov V. S., Klepikov A. S.
ArticleAuthorsData

Scientific and Production Association “RIVS”, Saint Petersburg, Russia:

V. S. Trubilov, Head of Geotechnology Department
A. S. Klepikov, Leading Engineer of Hydrometallurgy Department, e-mail: A_klepikov@rivs.ru

ArticleName Possibility of application of hydrometallurgical methods for increasing of sulfide copper concentrates quality
ArticleAuthors Boduen A. Ya., Ivanov B. S., Ukraintsev I. V.
ArticleAuthorsData

Hydrometallurgy Department of Scientific and Production Association “RIVS”, Saint Petersburg, Russia:

A. Ya. Boduen, Head of Liquid Processing Department, e-mail: A_Boduen@rivs.ru
B. S. Ivanov, Production Engineer
I. V. Ukraintsev, Chief Executive Officer

ArticleName Possobility of hydrometallurgical conditioning of low grade concentrates, obtained during copper-zinc sulfide ores processing
ArticleAuthors Ivanov B. S., Boduen A. Ya., Yagudina Yu. R., Cheremisina O. V.
ArticleAuthorsData

Department of Hydrometallurgy, Scientific and Production Association “RIVS”, Saint Petersburg, Russia:

B. S. Ivanov, Engineer of Department of Obtaining and Processing of Solutions
A. Ya. Boduen, Head of Department of Obtaining and Processing of Solutions

 

JSC “Uchaly Mining and Metallurgical Combine”, Uchaly, Russia:
Yu. R. Yagudina, Head of Research Laboratory


3 National Mineral Resources University (University of Mines), Saint Petersburg, Russia:
O. V. Cheremisina, Leading Scientific Expert

NOBLE METALS AND ALLOYS
ArticleName Basic problems of decontamination of cyanide-containing solutions and slurries of Russian gold mining industry. Part 4. Processes, based on extraction and reuse of cyanides
ArticleAuthors Vorobev-Desyatovskiy N. V., Ermakov D. V.
ArticleAuthorsData

JSC “Polymetal Engineering”, Saint Petersburg, Russia:

N. V. Vorobev-Desyatovskiy, Head of Hydrometallurgy Department, e-mail: vdesjatovsky@polymetal.spb.ru


SRK Consulting, Moscow, Russia:
D. V. Ermakov, Senior Concentration Engineer

ArticleName Use of disintegration approaches in the time of processing of copper-electrolyte slimess
ArticleAuthors Mastyugin S. A., Lastochkina M. A., Naboychenko S. S., Voinkov R. S.
ArticleAuthorsData

JSC “Uralelectromed”, Verkhnyaya Pyshma, Russia:

S. A. Mastyugin, Chief Precious Metals Technologist of Technical Department, e-mail: S.Mastugin@elem.ru

R. S. Voinkov, Head of Chemical-Metallurgical Shop Department

 

LLC “Institute “Gipronikel”, Saint Petersburg, Russia:
M. A. Lastochkina, Senior Researcher of Hydrometallurgy Laboratory

 

Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia:
S. S. Naboychenko, Head of a Chair of Heavy Non-Ferrous Metals Metallurgy, phone: +7(343) 375-48-93

ALUMINIUM, ALUMINA, CARBON MATERIALS
ArticleName Basis of kinetics and technology of aluminothermic obtaining of AI – Zr ligature from ZrO2 in chloride-fluoride salt melts
ArticleAuthors Makhov C. V., Moskvitin V. I., Popov D. A.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

C. V. Makhov, Senior Researcher
V. I. Moskvitin, Professor, e-mail: vmoskvitin@mail.ru
D. A. Popov, Engineer (Chair of Non-ferrous Metals and Gold)

NANOSTRUCTURED METALS AND MATERIALS
ArticleName Nanostructured metallic materials with nickel- and palladium- based amorphous and crystalline structure
ArticleAuthors Churyumov A. Yu., Ketov S. V., Bazlov A. I., Luzgin D. V.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

A. Yu. Churyumov, Assistant Professor, (Chair of Physical Metallurgy of Non-Ferrous Metals), e-mail: churyumov@misis.ru
A. I. Bazlov, Student, (Chair of Physical Metallurgy of Non-Ferrous Metals)

 

Tohoku University, Sendai, Japan:

S. V. Ketov, Researcher
D. V. Luzgin, Professor

ArticleName Research of influence of catalytic metal layer on morphology of carbon nanotubes, obtained by PE-CVD method
ArticleAuthors Kozhitov L. V., Muratov D. G., Kiselev B. G., Yakushko E. V.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

L. V. Kozhitov, Professor
E. V. Yakushko, Post-Graduate Student

 

A. V. Topchiev Institute of Petrochemical Synthesis (Russian Academy of Sciences), Moscow, Russia:
D. G. Muratov, Senior Researcher

 

1National University of Science and Technology “MISiS”, Moscow, Russia, 2JSC “SPONK”, Moscow, Russia:
B. G. Kiselev, Chief Executive Officer2, Assistant Professor of Applied Economics Chair1, phone: +7 (495) 950-48-55

COMPOZITES AND MULTIPURPOZE COATINGS
ArticleName Centrifugal SHS-metallurgy of nickel aluminide based cast alloys, high-alloyed by boron
ArticleAuthors Sanin V. N., Ikornikov D. M., Yukhvid V. I., Levashov E. A.
ArticleAuthorsData

Institute of Structural Macrokinetics and Materials Science of Russian Academy of Sciences, Chernogolovka, Russia:

V. N. Sanin, Leading Researcher, e-mail: svn@ism.ac.ru
D. M. Ikornikov, Research Engineer
V. I. Yukhvid, Head of Laboratory

 

National University of Science and Technology “MISiS”, Moscow, Russia:
E. A. Levashov, Head of a Chair of Powder Metallurgy and Functional Coatings

METAL PROCESSING
ArticleName New aluminium-lithium alloy of Al – Cu – Mg – Li(Ag, Sc) system, intended for manufacturing of thin sheets and thin-walled sections
ArticleAuthor Ovsyannikov B. V.
ArticleAuthorData

JSC “Kamensk Uralsky Metallurgical Works”, Kamensk Uralsky, Russia:

B. V. Ovsyannikov, Chief Metallurgist

ArticleName Functional connection of absolute thermal e. m. f. and coefficient of volume expansion of metallic systems
ArticleAuthors Selyanin I. F., Deev V. B., Kutsenko A. I., Prikhodko O. G.
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia:

I. F. Selyanin, Professor (Chair of Materials Science, Foundry and Welding)
A. I. Kutsenko, Assistant Professor, Head of Department of Scientific Researches
O. G. Prikhodko, Assistant Professor, Head of Education-Methodical Center

 

National University of Science and Technology “MISiS”, Moscow, Russia:
V. B. Deev, Chief Researcher of Engineering Center “Foundry Technologies and Materials”, Professor of a Chair of Foundry Processes Technology, e-mail: deev.vb@mail.ru

ArticleName Processing of aluminium scrap and wastes in inclined axle rotor furnaces
ArticleAuthors Gel V. I., Ivanov I. P., Klementev A. S.
ArticleAuthorsData

Yaroslav-the-Wise Novgorod State University, Veliky Novgorod, Russia

V. I. Gel, Professor of a Chair of Ecology and Nature Management, e-mail: gel942@yandex.ru

 

LLC “EMIT”, Kharkiv, Ukraine.

I. P. Ivanov, Engineer, Founder


LLC “Engineering-RM”, Saint-Petersburg, Russia.

A. S. Klementev, Engineer, Head of Design Office

ArticleName Influence of liquid hot isostatic pressing on structure and properties of new lean alloyed high strength casting aluminum alloy Al6Zn0.5Ni (АЦ6Н0,5Ж) on the basis of Al – Zn – Mg – Ni – Fe system
ArticleAuthors Akopyan T. K., Belov N. A., Kaybyshev R. O., Alabin A. N.
ArticleAuthorsData

A. A. Baikov Institute of Metallurgy and Materials Science of Russian Academy of Sciences, Moscow, Russia:

T. K. Akopyan, Acting Junior Researcher, e-mail: aktorgom@gmail.com

 

National University of Science and Technology “MISiS”, Moscow, Russia:

N. A. Belov, Professor, Director of Engineering Center “Innovation Casting Technologies and Materials”

A. N. Alabin, Head of Department of Engineering Center “Innovation Casting Technologies and Materials”


Belgorod State National Research University, Belgorod, Russia:
R. O. Kaybyshev, Head of Laboratory of Mechanical Properties of Nanostructure and Heat-Resistance Materials

ArticleName Mechanical properties of lap joints of 1565chM (1565чМ) alloy sheets
ArticleAuthors Drits A. M., Ovchinnikov V. V.
ArticleAuthorsData

JSC “Alcoa-SMZ”, Moscow, Russia:

A. M. Drits, Director on Development of Business and Technologies, e-mail: Alexander.Drits@alcoa.com

 

Moscow State Industrial University, Moscow, Russia:
V. V. Ovchinnikov, Professor (Chair of Structural Materials Technology)

CHRONICLE
ArticleName Dedicated to the memory of E. M. Bychkov
ArticleAuthors Dmitriev V. A., Vorobev A. G., Timofeev N. I., Vasekin V. V., Bychkova O. E.
ArticleAuthorsData

Ekaterinburg Non-Ferrous Metals Processing Plant, Ekaterinburg, Russia:

V. A. Dmitriev, Chief Engineer (1989–2002)1


1“Ore and Metals” Publishing House, Moscow, Russia; 2National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia:
A. G. Vorobev, Chief Editor1, Professor, Head of a Chair of Economics2, e-mail: tsvetmet@rudmet.ru

 

LLC “Uraldragmet-Holding”, Ekaterinburg, Russia:
N. I. Timofeev, Chief Executive Officer


JSC “Scientific-Production Association “Supermetall”, Moscow, Russia:
V. V. Vasekin, Chief Executive Officer


O. E. Bychkova, Journalist

Journals →  Tsvetnye Metally →  2014 →  #11